Bayer HealthCare Contour Next Link User Manual page 28

SETUP
Sound
OK
AutoLog: Off
Target
AUTOLOG
AutoLog is Off.
Accept
Turn On
AutoLog is On.
NOTE:
• When you change your AutoLog setting to ON, you are
asked to confirm your Target settings for Fasting, Before
Meal and After Meal.
• Your test result does not display until you make an
AutoLog selection.
• If your result is above or below your High or Low
Alert settings, you will see your result without pushing
a button.
To Turn Off AutoLog
NOTE: Your meter comes with AutoLog OFF.
1. Press and hold the top Menu button to turn the meter on.
2. Press the button next to Setup.
SETUP
Sound
OK
AutoLog: On
Target
AUTOLOG
AutoLog is On.
Accept
48
Turn Off
3. Press the M button to
highlight AutoLog. Press OK
to select.
4. Press Turn On to activate
AutoLog.
A screen confirms
your choice.
3. Press the M button to
highlight AutoLog. Press OK
to select.
4. To turn AutoLog OFF,
press Turn Off.
AutoLog is Off.
NOTE: When you change your AutoLog setting to OFF,
you are asked to confirm your Target setting.
Blood Sugar Targets
Targets are your personal ranges for your blood sugar results.
With AutoLog OFF, you have a single Target range. With
AutoLog ON, you have Target ranges for Fasting, Before Meal,
and After Meal.
WARNING
Talk to your health care professional before setting any
Target ranges on your meter.
Changing Targets With AutoLog Off
When AutoLog is OFF, you have only one Target range. It
comes preset to 3.9 - 10.0 mmol/L.
NOTE: Targets can only be set inside your selected
Alert level(s). For additional information, please contact
Diabetes Support. Contact information for Diabetes
Support is on the back cover.
1. Press and hold the top Menu button to turn the meter on.
2. Press the button next to Setup.
SETUP
AutoLog
OK
Target
Trends Range
TARGET
Accept
3.9 - 10.0
Change
A screen confirms
your choice.
3. Press the M button to
highlight Target. Press OK
to select.
4. To make changes to
your Target range,
press Change.
49