Table of Contents
Advertisement
Climate Controls
15. Driver side temperature control: Press to increase/decrease the
temperature on the driver side of the vehicle in dual zone or the
temperature of both the driver and passenger sides in single zone.
16. AUTO: To engage automatic temperature control, press AUTO and
select the desired temperature using the temperature control. The
system will automatically determine fan speed, airflow distribution, A/C
on or off, and outside or recirculated air, to heat or cool the vehicle to
reach the desired temperature.
Operating tips
• To reduce fog build up on the windshield during humid weather,
select
(defrost) or
• To reduce humidity build up inside the vehicle, do not drive with the
system OFF or with
• Do not put objects under the front seats that will interfere with the
airflow to the back seats.
• Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
• To improve the A/C cool down, drive with the windows slightly open
for 2-3 minutes after start up or until the vehicle has been "aired out."
For maximum cooling performance in MAX A/C mode:
• Automatic operation:
1. Press AUTO for full automatic operation.
2. Do not override A/C or
3. Set the temperature to 60°F (16°C).
• Manual operation:
1. Select
or
.
2. Select A/C and
with A/C to provide colder airflow.
3. Set the temperature to 60°F (16°C).
4. Set highest fan setting initially, then adjust to maintain comfort.
To aid in side window defogging/demisting in cold weather:
1. Select
.
2. Select A/C.
3. Adjust the temperature control to maintain comfort.
62
2008 MKX (mkx)
Owners Guide (post-2002-fmt)
USA (fus)
(floor/defrost).
(recirculated air) engaged and A/C off.
(recirculated air).
(recirculated air). Use
(recirculated air)
Advertisement
Table of Contents
