Ford Transit Owner's Handbook Manual page 160

WARNINGS
Switch off the ignition and apply
the handbrake. Select first or
reverse gear.
Have the passengers leave the
vehicle.
Always secure the diagonally
opposite wheel with an
appropriate block or wheel chock
when changing a wheel.
Make sure that the arrows on
directional tyres point in the
direction of rotation when the vehicle
is moving forwards. If a spare wheel
has to be fitted with the arrows
pointing in the opposite direction of
rotation, have the tyre refitted in the
correct direction by a properly trained
technician.
Only use the vehicle jack to
change a wheel. Never work
underneath the vehicle when it is
supported only by the jack.
Note: Make sure that the jack is
vertical to the jacking point and the
base is flat on the ground.
E70956
Wheels and tyres
158
• Remove the hub cover.
• Remove the nut caps.
• Slacken the wheel nuts.
430 series vehicles
E70959
• Slide the flat end of the jack
handle over the locking valve.
Turn the handle fully clockwise.
Insert the handle into the pump,
and lift the vehicle using a
pumping motion.
All except 430 series vehicles
E70957
• Unfold the jack handle.