Engine Coolant Check; Brake And Clutch Fluid Check - Ford Transit Owner's Handbook Manual

Hide thumbs Also See for Transit:
Table of Contents

Advertisement

ENGINE COOLANT
CHECK
Checking the coolant level
WARNING
Do not allow the fluid to touch
your skin or eyes. If this
happens, rinse the affected areas
immediately with plenty of water and
contact your doctor.
CAUTION
Make sure that the level is
between the MIN and the MAX
marks.
Note: Coolant expands when it is
hot. The level may therefore extend
beyond the MAX mark.
If the level is at the MIN mark, top up
immediately.
Topping up
WARNINGS
Only top up when the engine is
cold. If the engine is hot, wait 10
minutes for the engine to cool down.
Do not remove the filler cap
when the engine is running.
Do not remove the filler cap
when the engine is hot. Wait for
the engine to cool down.
Unscrew the cap slowly. Any
pressure will escape slowly as you
unscrew the cap.
Maintenance
Top up with fluid that meets the Ford
specification. See Technical
specifications (page 139).
BRAKE AND CLUTCH
FLUID CHECK
happens, rinse the affected areas
immediately with plenty of water and
contact your doctor.
marks.
Note: The brake and the clutch
systems are supplied from the same
reservoir.
If the level is at the MIN mark, top up
immediately.
Topping up
Remove the filler cap.
137
CAUTIONS
Do not spill coolant on any part
of the engine.
Do not top up further than the
MAX mark.
WARNING
Do not allow the fluid to touch
your skin or eyes. If this
CAUTION
Make sure that the level is
between the MIN and the MAX

Advertisement

Table of Contents
loading

Table of Contents