Cd/Dvd Drive; Removing A Cd/Dvd Drive - Dell Precision Workstation 450 User Manual

See the documentation that came with the drive for instructions on installing any
software required for drive operation.
Enter system setup and update the appropriate Diskette Drive A option to reflect the
8
size and capacity of your new floppy drive.
To verify that your computer works correctly, run the Dell Diagnostics.
9

CD/DVD Drive

CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Shut down the computer through the Start menu.
1
Ensure that your computer and attached devices are turned off. If your computer and
2
attached devices did not automatically turn off when you shut down your computer,
turn them off now.
NOTICE: To disconnect a network cable, first unplug the cable from your computer and then
unplug it from the network wall jack.
Disconnect any telephone or telecommunication lines from the computer.
3
Disconnect your computer and all attached devices from electrical outlets, and then
4
press the power button to ground the system board.
If you have installed a padlock through the padlock ring on the back panel, remove the
5
padlock.
CAUTION: To guard against electrical shock, always unplug your computer from
the electrical outlet before opening the cover.
NOTICE: Before touching anything inside your computer, ground yourself by touching an
unpainted metal surface, such as the metal at the back of the computer. While you work,
periodically touch an unpainted metal surface to dissipate any static electricity that could harm
internal components.
Open the computer cover.
6

Removing a CD/DVD Drive

Disconnect the power and CD/DVD drive cables from the back of the drive.
1
148 Driv es
System Information Guide
.