2
1
If necessary, disconnect any cables connected to the card.
3
Grasp the card by its top corners, and ease it out of its connector.
4
If you are removing the card permanently, install a filler bracket in the empty card-slot
5
opening.
If you need a filler bracket, contact Dell.
NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC
certification of the computer. The brackets also keep dust and dirt out of your computer.
Lower the retention arm and press it into place, securing the card(s) in the computer.
6
3
1 base
2 release tabs (2)
3 AGP retention spring
123