Bang & Olufsen BeoVision 8 User Manual page 30

30
Add four Power Link speakers and a
BeoLab subwoofer to your setup and
you have a surround sound system.
A surround sound setup fits easily
into your living room. Let the picture
determine your ideal listening and
viewing position. You get the best
sound experience in the area created
by the speakers.
Loudspeaker setup – surround sound
Select speaker types
Connect the loudspeakers to the Power Link
sockets on the television. Refer to the Guide
enclosed with the loudspeakers for specific
information about how to set them up. Refer
to 'Connection panels' on page 51 for
information about the Power Link sockets.
Remember to set the L–R–LINE switch on both the
front and rear set of speakers to L or R (left and
right sound channel) to indicate their position in
each set. Set the left speakers to L and the right
speakers to R.
To register the speaker types ...
> Press MENU to bring up the TV SETUP menu
and press to highlight SOUND.
> Press GO to bring up the SOUND menu and
press to highlight SPEAKER TYPE.
> Press GO to bring up the SPEAKER TYPE menu.
> Press or to reveal your speaker type and
move on to the next speaker set. Choose NONE
if no speakers are connected.
> If you have a BeoLab subwoofer, press
move the cursor to SUBWOOFER and press
change the field to YES.
> Press GO to store or EXIT to leave the menu
without storing.
SPEAKER TYPE
FRONT
REAR
SUBWOOFER
Always select your most powerful speakers as
front speakers.
to
to
to
BEOLAB 8000
BEOLAB 4
YES
store
GO