Remote Access Methods and Monitoring
Telnet Server
Telnet Server is a utility that lets users connect to machines, log on, and obtain a command
prompt remotely. Telnet Server is preinstalled on the NAS server, but must be activated before
use.
Enabling Telnet Server
Telnet Server can be enabled in two ways. The first is to use Remote Desktop to access a
command line interface and enter the following command:
The Telnet Server service needs to be enabled prior to running this command. The service can
be enabled by opening the services MMC:
1. Select Start, Run, then type services.msc.
2. Locate the Telnet service, right-click on it, then select Properties.
3. In the startup type drop-down box, choose Manual, and click OK.
The second is to open the WebUI:
1. Click Network.
2. Click Telnet.
3. Check the Enable Telnet access to this appliance box.
4. Click OK.
Sessions information
The sessions screen provides the ability to view or terminate active sessions.
148
Caution:
For security reasons, the Telnet Server service must be restarted each time the
server is restarted.
net start tlntsvr
NAS 1500s and 500s Administration Guide