Adding A New Client Group; Deleting A Client Group - HP StorageWorks NAS 1500s Administrator's Manual

Microsoft Services for NFS

Adding a new client group

To add a new client group:
1. From the NFS Client Groups page, click New. The New NFS Client Group page is
Figure 64: New NFS Client Group page
2. Enter the name of the new group.
3. Enter the client name or their IP address.
4. Click Add. The system adds the client to the displayed list of members.
5. To remove a client from the group, select the client from the Members box and then click
6. After all clients have been added to the group, click OK. The NFS Client Groups page is

Deleting a client group

To delete a group:
1. From the NFS Client Groups page, select the group to delete and click Delete.
2. A verification screen is displayed. Confirm that this is the correct group and then click
126
displayed.
Remove.
displayed again.
OK.
The NFS Client Groups page is displayed again.
NAS 1500s and 500s Administration Guide