Table of Contents
Advertisement
Web sharing (HTTP)
From the Web Sharing tab of the Create New Share page:
1. Select the read and write access permissions that are allowed.
2. Click OK.
AFP (Appletalk) sharing
AppleTalk shares can be set up only after AppleTalk Protocol and File Services for Macintosh
have been installed on the NAS server.
Note:
local memory use.
Installing the AppleTalk Protocol
To install the AppleTalk Protocol:
1. From the desktop of the NAS server, click Start, navigate to Settings-Network
2. Click Install. The Select Network Component Type dialog box is displayed.
Figure 46: Local Area Connection Properties page, Install option
3. Select Protocol and click Add.
4. Select AppleTalk Protocol and click OK.
Installing File Services for Macintosh
To install File Services for Macintosh:
1. Select Maintenance from the WebUI interface.
2. Select Remote Desktop.
3. Open Add/Remove Programs from the Control Panel.
4. Click Add/Remove Windows Components.
5. Double-click Other Network File and Print Services.
NAS 1500s and 500s Administration Guide
AppleTalk shares should not be created on clustered resources as data loss can occur due to
Connections. Right-click Local Area Connection, and then click Properties.
Figure 46
is an example of the Select Network Component Type dialog box.
Folder, Printer, and Share Management
91
Advertisement
Table of Contents
