To Activate; To Set At A Desired Speed; To Deactivate; To Resume Speed - Chrysler town & country 2007 Manual

164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

To Activate:

Push the "ON/OFF" button once and the CRUISE indi-
cator located below the instrument cluster odometer will
illuminate showing the electronic speed control system is
on. To turn the system OFF, push the "ON/OFF" button
again and the system and indicator will turn off.
WARNING!
Leaving the Electronic Speed Control system on
when not in use is dangerous. You could accidently
set the system or cause it to go faster than you want.
You could lose control and have an accident. Always
leave the system OFF when you aren't using it.

To Set At A Desired Speed:

When the vehicle has reached the desired speed, press
and release the "SET" button. Release the accelerator and
the vehicle will operate at the selected speed.

To Deactivate:

A soft tap on the brake pedal, pushing the "CANCEL"
button or normal braking while slowing the vehicle will
deactivate the speed control without erasing the set
speed memory. Pushing the "ON/OFF" button to the
OFF position or turning off the ignition erases the set
speed memory.

To Resume Speed:

To resume a previously set speed, push and release the
"RESUME/ACCEL" button. Resume can be used at any
speed above 25 mph (40 km/h).
I n f o r ma t i o n P r o v i d e d b y :