Sub-Zero 700TF(I) Planning Information page 6

Planning Information
Model 700TF(I)
I N T E G R A T I N G C A B I N E T R Y
Dimensions in parentheses are in
millimeters unless otherwise specified.
C A B I N E T R Y A P P L I C A T I O N S
Integrated refrigeration is compatible with virtually any
style and look of cabinetry. The models can be used with
framed as well as frameless cabinets. Because of the
precise application and the look you may want to achieve,
there are important questions you need to answer before
ordering panels for the doors and/or drawers. As you look
at styles of cabinets, keep some important facts in mind:
Weight Limitations – The door panel cannot exceed
40 lbs (18 kg) and each drawer panel must not exceed
12 lbs (5 kg).
Panel Thickness – Door and drawer panels must be a
5
minimum of / " (16) thick.
8
The height of the door panel can grow beyond 45
(1153) and exceed the 80" (2032) overall height as long as
you stay below the recommended door panel weight limit.
The toe kick clearance can vary with the height of the
lower drawer panel; the maximum panel height is 16
(424). You must keep a minimum space of 4" (102) clear
below the bottom edge of the lower drawer panel so the
unit can be properly vented.
We recommend using D-style handles. For the cabinet
door, handles must be located near the edge of the panel
opposite the hinge, centered top to bottom. Locate
handles in the top center area of the drawer panels.
IMPORTANT NOTE: The depth of each Integrated unit is
24" (610) from the front of the unit to its back. You must
allow for the thickness of the panel you are applying when
planning for the finished rough opening depth if you want
the front panel to be flush with surrounding cabinetry. You
may have to move the unit back into drywall or bring the
cabinets forward to achieve a flush fit.
As the reveal between cabinets and the Integrated unit
decreases, the potential exists for severe finger
pinching or crushing if a hand or fingers are placed in
the opening when the door is closing.
3
/ "
8
11
/ "
16
6