Table of Contents
Advertisement
1
QQ
3 7 63 1515 0
A
[7] ATA/ATAPI DEBUG OSD
Performance data of the DRIVE Assy can be confirmed. Refer to the fourth screen, shown below, for the judgments on
degradation of LDs and use them as a guide for replacement of the DRIVE Assy.
Replace the DRIVE Assy if any of the LDs is judged as NG.
To display the first screen, press the [ESC], [DISP], then [3] keys, in that order.
To display the third screen, press the [DIG/ANA] key twice.
• 3rd screen (ATA/ATAPI DEBUG OSD-Drive maintenance data)
1
2
3
B
4
5
The power-on duration and error logs that the writer manages are displayed.
• 4th screen (ATA/ATAPI DEBUG OSD-Judgment of degradation of LDs)
It is indicated to what extent the LDs (for BD, DVD, and CD) of the drive have degraded. To update the on-screen data,
C
content and updating conditions, see Table 1 below:
Table 1: Display content and updating conditions
Display Item
TE
L 13942296513
BD
DVD
CD
TMP
D
[8] ETHERNET CHECK MODE
Note: To use this mode, a PC that supports LAN and RS-232C connection and LAN environment are required.
In this mode, the result of communication via the Ethernet connector is displayed.
1. Connect the Blu-ray disc player and the PC via a LAN cable and RS-232C cable (Interlink cross cable).
2. Perform the network settings of the PC, as follows:
IP Address
Subnet Mask
E
3. Start up the terminal software* of the PC then perform the port settings,
as shown below. Improper settings will lead to
failure in communication.
* Example of how to access the port settings when Windows is used:
From the Start menu, select All Programs, Accessories, Communications,
then Hyper Terminal Software.
Baud rate
Data
www
Parity
Stop
Flow
F
4. Press the [ESC], [CHP/TIM], then [3] keys, in that order, to send a ping from the player to the PC. "OK" will be displayed on
the terminal software of the PC within 10 seconds if Ethernet communication is properly performed.
If "NG" is displayed, improper LAN or RS-232C connection settings, connection error,
or failure in the player may be suspected.
34
1
http://www.xiaoyu163.com
2
1 Accumulated power-on duration
2 LD read power-on duration for the BD
3 LD read power-on duration for the DVD
4 LD read power-on duration for the CD
5 Serial No. of the PU
Display Content
Judgment of degradation of the LD for BD.
NG with a rate of 120% or higher
Judgment of degradation of the LD for DVD.
NG with a rate of 120% or higher
Judgment of degradation of the LD for CD.
NG with a rate of 120% or higher
Current temperature inside the writer
: 192.168.0.200
: 255.255.255.0
: 115200
: 8 bits
: None
: 1 bit
x
ao
y
: None
.
i
2
http://www.xiaoyu163.com
3
8
Q Q
3
6 7
1 3
Blu-ray Disc PLAYER
u163
.
BDP-320
3
4
2 9
9 4
2 8
1 5
0 5
8
2 9
9 4
Connection diagram of the Interlink cross cable
DSB 9Pin
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
Female
Female
m
RS-232C
co
OK or NG
OK or NG
OK or NG
LAN
4
9 9
2 8
9 9
PC
Hide quick links:
Advertisement
Table of Contents
