Installing The Receiver - Proficient One Owner's Manual

INSTALLING THE RECEIVER

Attach with Adhesive
Front of TV
Flat
End
Attach with Adhesive
PROFICIENT ONE
IR Receiver
Ridged End
Diagram 2 - TV Mount Adapter -
Rear Mount
TV MOUNT ADAPTER
The TV Mount Adapter allows mounting the IR Receiver on an extension
attached to the rear or side of a flat panel TV that does not have a frame
on the front that is wide enough to directly mount the IR Receiver. This
application can also be used to mount the IR Receiver in just about any
position on just about any object.
Both ends of the TV Mount Adapter rotate and swivel allowing the Adapter
and IR Receiver to be manipulated into different positions as shown in
Diagram 4.
1.
Select a location on the TV to mount the TV Mount Adapter. Be sure that
once mounted, the IR Receiver will not be blocked by any object to allow
'line-of-sight' to the remote control in normal use.
2.
With the 8" Receiver Cable aligned to the Wire Gap on the ridged
end of the TV Mount Adapter, (Diagram 5) using one of the round,
notched adhesive strips, attach the IR Receiver to the TV Mount Adapter.
Diagrams 2 & 3
3.
Using one of the round adhesive strips, attach the flat end of the TV
Mount Adapter to the TV frame. Diagrams 2 & 3 & 5
4.
Carefully flatten and wrap the 8" Receiver Cable around to the back of
the TV. The Receiver Cable can be secured to the TV with tape or a wire
holder if necessary. Do not block any TV vents.
5.
Using one of the round adhesive strips, attach the Electronics Module to
the rear of the TV. Do not block any TV vents.
Diagrams 2 & 3
6.
Carefully flatten and wrap the plug end of the Receiver Cable into the
cabinet with the A/V components. Be careful not to pinch or strain the
Receiver Cable. The Receiver Cable can be secured to the back of the
TV with tape or a wire holder. Do not block any TV vents. If this is your
application, when finished, proceed to section: Typical Connections.
PROFICIENT ONE
Electronics Module
To IR Router
RCVR Jack
PROFICIENT ONE
TV Mount Adapter
8" Receiver Cable
Front of TV
Attach with
Adhesive
Ridged End
PROFICIENT
ONE
PROFICIENT ONE
IR Receiver
TV Mount Adapter
Diagram 3 - TV Mount Adapter -
Bottom/Side Mount
6
Attach with Adhesive
PROFICIENT ONE
Electronics Module
Flat End
Attach with
8" Receiver Cable
Adhesive
To IR Router
RCVR Jack
360°
180°
Diagram 4
Flat End
Wire
Gap
Ridged End
Diagram 5