Proficient One Owner's Manual page 13

Electronics Module
IR Parallel Block
REMOTE ROOM
MULTI-ROOM APPLICATION
Another application is multi-room IR control. If an audio receiver or amplifier is being used
to drive speakers in multiple rooms, it may be desirable to place an IR Receiver in some or
all of those rooms to control the audio components from another room. In many cases,
this same application can be used to control the main zone and second zone of a two-zone
A/V Receiver.
This will allow a user to turn the system ON/OFF with an IR remote via the IR Receiver(s)
in the remote room(s). The system can also be controlled from the main room with an IR
remote using the IR Receiver in the main room.
Installation combines the connections described in the previous Single Room and Extending
the Wire sections. The Main Room IR Receiver gets connected to the 'IR RCVR' jack on the
IR Router and the multi-room receiver(s) get connected to the screw terminals on the IR
Router using either the BOT-1.0 (Diagram 17) or IR Parallel Block (Diagram 18).
PROFICIENT ONE
IR Receiver
Hand Held
IR Remote
+12V
GND
IR
3-Conductor
Extension Cable
(unshielded)
Diagram 18 - Multi-Room Application
TYPICAL CONNECTIONS
IR Dual
Flasher PTP-1
IR Power
Supply
12VDC Regulated
500mA
PROFICIENT ONE
IR Receiver
Hand Held
IR Remote
MAIN ROOM
13
DVD
IR Flasher
w/red LED
Cable
IR Flasher
w/red LED
A/V Receiver
PTP-1
Plug to Plug
Jumper Cable
To 120V AC
(unswitched)
Electronics Module