Working Hints For Your Angle Grinder; Maintenance - Titan SF115XP Safety And Operating Manual

The abrasive discs operate more efficiently when
light pressure is exerted, thus avoiding a drop
in the speed of your angle grinder. If your angle
grinder becomes too hot, run your angle grinder
under no load for 2-3 minutes until it has cooled
to normal operation temperature.
WORKING HINTS
ANGLE GRINDER
1. Your angle grinder is useful for both cutting
through metals, ie. for removing screw heads,
and also for cleaning / preparing surfaces, ie.
before and after welding operations.
2. Different types of wheel/cutter will allow the
grinder to meet various needs.Typically, grinding
wheels/cutting discs are available for mild
steel, stainless steel, stone and brick. Diamond
impregnated discs are available for very hard
materials.
3. If the grinder is used on soft metals such as
aluminum the wheel will soon clog and will have
to be changed.
4. At all times, let the grinder do the work, do not
force it or apply excessive pressure to the wheel/
disc.
5. If cutting a slot ensure that the cutter is kept
aligned with the slot, twisting the cutter may
cause the disc to shatter. If cutting through thin
sheet, only allow the cutter to just project through
the material, excessive penetration can increase
the chance of causing damage.
6. If cutting stone or brick, it is advisable to use a
dust extractor.

MAINTENANCE

WARNING:
disconnected from the mains power supply
before attempting any maintenance.
1. Keep the grinder ventilation slots clean and free
from obstructions. If available, blow compressed
air into the vents to clear any internal dust (safety
goggles must be worn when undertaking this
process).
2. Keep the outer case of the grinder clean and
free from grease. Do not wash with water or use
solvents or abrasive. Use only mild soap and a
damp cloth to clean the tool. Never let any liquid
get inside the tool. Never immerse any part of the
FOR
Ensure the grinder
YOUR
is