Advertisement
Quick Links
A/C HP Audio Hi
Pass 2 Mic
Pass 1 Mic
Copilot Mic
Copilot PTT
Exp. Audio Input
Exp. Power
Expansion Audio (R)
Expansion Audio (L)
Pass 2 Audio (R)
Pass 2 Audio (L)
Pass 1 Audio R
Pass 1 Audio (L)
Copilot HP Audio (R)
Copilot HP Audio (L)
Pilot HP Audio (R)
Pilot HP Audio (L)
Pilot PTT
Pilot Mic
Misic Input (R)
Music Input (L)
A/C Radio PTT
A/C Mic Audio Hi
Power Input 11-33 VDC
PM2000 Operation/Installation Manual
Page 8
Revision 2, August 1998
9800 Martel Road
Lenoir City, TN 37772
(423) 988-9800 FAX (423) 988-6619
PM2000
4-Place Stereo
Panel Mounted Intercom
Operator's and Installation Manual
NOTICE: In certified aircraft, warranty is
not valid unless this product is installed by an
Authorized PS Engineering dealer.
Revision 2, August 1998
Document Number 200-195-0002
Revision 2 August 1998
Page 1
200-195-0002
Advertisement
Related Manuals for PS Engineering PM2000
Summary of Contents for PS Engineering PM2000
- Page 1 Operator's and Installation Manual Document Number 200-195-0002 NOTICE: In certified aircraft, warranty is not valid unless this product is installed by an Revision 2 August 1998 Authorized PS Engineering dealer. PM2000 Operation/Installation Manual Page 8 Revision 2, August 1998 Revision 2, August 1998...
- Page 2 Service 3 Strip both ends of the insulation eight output amplifiers are being changed si- bilities. The PM2000 only allows the audio of multaneously. Likewise, when the squelch con- 4 Solder the two ends to the ground lug to the the person who presses their PTT to be transmit- Call PS Engineering, Inc.
-
Page 3: Specifications
Audio Distortion: <10% @ 150mW into 150 Ø0.265 in Ø0.375 in PM2000, or if the power switch is turned off, the the aircraft radio. load copilot will not hear the aircraft radio. Only the Ω... - Page 4 Ground loop noise occurs when there are mic jack. See Appendix A for modifica- PM2000. You may want to install a " stereo headset jacks installed, you may re-use the hard- two ground paths for the same signal, i.e. air- tion details.
Need help?
Do you have a question about the PM2000 and is the answer not in the manual?
Questions and answers