Table of Contents
Advertisement
Quick Links
PM1000 II
FAA-Approved
4-Place, Panel Mounted Intercom
Operator's and Installation Manual
Part Number 11920 (with Crew) and 11922 (without Crew)
FAA-TSO C50c
PS E
, I
9800 Martel Road
Lenoir City, TN 37772
Phone (865) 988-9800 FAX (865) 988-6619
www.ps-engineering.com
NOTICE: In certified aircraft, warranty is not
Document Number 200-123-0003
valid unless this product is installed by an
Authorized PS Engineering dealer.
Revision 8, May 2020
PS Engineering, Inc. 2020©
Revision 8, May 2020
Page 1
200-123-0003
Copyright Notice
Any reproduction or retransmittal of this publication, or any portion thereof, without the expressed written permission
of PS Engineering, Inc. is strictly prohibited. For further information contact the Publications Manager at PS Engi-
neering, Inc., 9800 Martel Road, Lenoir City, TN 37772. Phone (865) 988-9800
Advertisement
Table of Contents
Related Manuals for PS Engineering PM1000 II
Summary of Contents for PS Engineering PM1000 II
- Page 1 Any reproduction or retransmittal of this publication, or any portion thereof, without the expressed written permission of PS Engineering, Inc. is strictly prohibited. For further information contact the Publications Manager at PS Engi- neering, Inc., 9800 Martel Road, Lenoir City, TN 37772. Phone (865) 988-9800...
-
Page 2: Section I General Information
Approval Basis Scope The PM1000II, part numbers 11920 and 11922 are This manual contains installation and operational in- FAA-approved under TSO-C50c. structions for the following PS Engineering units: Model Description Part Number Specifications PM1000II 4-place intercom system w/Pilot ISO... -
Page 3: Section 2 Installation
It should be free of electrical or cosmetic defect. Upon made as shown in Appendix D. receipt, verify that the parts kit includes the following: PS Engineering can make a custom-tailored wiring harness for the installer. All harnesses use Mil-spec quality components with professional techniques, and are fully tested before shipment. -
Page 4: Power Requirements
Entertainment devices can be connected to the Failure to do so will cause internal damage and void PM1000II. Install 1/8" jacks convenient the pilot to PS Engineering's warranty. connect the entertainment device into the system. A 1.Apply power to the aircraft and avionics. -
Page 5: Section Iii Operation
5.Verify that the pilot can transmit and receive on the com transceivers. 6.Verify that the LED in the intercom changes from green to red when a microphone is keyed. 7.Verify proper intercom operation for pilot, copi- lot and passengers. For more information, consult Section III. -
Page 6: Section 4 Warranty And Service
NOTE: This mod does not alter be valid. normal operation. The following are sample proce- PS Engineering, Inc. warrants this product to be free dures for common PTT switches. Contact the PTT from defect in material and workmanship for a period manufacturer if you require more information. -
Page 7: Appendix C Instructions For Continuing Air- Worthiness
All panel jacks should be checked at each pe- copy of the operation instructions, contained riodic inspection to ensure that they are tight and in PS Engineering document 202-123-0001, not in contact with other items behind the instru- revision _, Dated:_____, is placed in the air- ment panel. - Page 8 PM1000II with crew, p/n 11920 11920 Connector layout, viewed from rear PM1000II Operation/Installation Manual Page 8 Revision 8, April 2020...
- Page 9 PM1000II NO crew, p/n 11922 11922 Connector layout, viewed from rear Monaural Headset Jack Details Revision 8, May 2020 Page 9 200-123-0003...
Need help?
Do you have a question about the PM1000 II and is the answer not in the manual?
Questions and answers