Each packed box is separated into upper and lower levels.
Upper level box contents:
•
Lower level contents: Three (3) boxes are placed in the lower level. One (1)
box contains the enclosure chassis with all the pre-installed components.
The other two (2) boxes contain the power cords and accessory items.
Accessory items include an RS-232C adapter cable, a null modem, a
VHDCI-to-VHDCI external SCSI cable, Quick Installation Guide, screws,
and a CD containing the RAIDWatch Manager software and its manual,
Installation
Application Note, and the SCSI to SATA RAID Subsystem's Operation
(firmware) Manual .
2.5.1 Pre-installed Components
The following components have been pre-installed in the GALAXY RAID
and therefore do not need to be installed:
2.5.2 Uninstalled Components
You must install the following components:
2.6 Hard Drive Installation
Your hard drives have been preinstalled and tested. Use the following
hard drive procedure when a faulty drive needs replacement.
Hard Drive Installation
Sixteen (16) drive trays
and
Hardware
1 - LCD keypad panel
2 - Subsystem handles (right and left)
1 - Backplane board
1 - Controller module
1 - DDR RAM DIMM module (installed in the controller module)
2 - PSU/cooling fan combo modules
Drive trays with installed drives
BBU (if ordered)
NOTE:
Chapter 2: Hardware Installation
Reference
Manual
(this
document),
5-7