Step 5: Installing Robopilib; Step 6: Installing The Robopi Firmware; Step 7: Installing Simpleide For The Raspberry Pi (Optional) - Raspberry Pi RoboPi User Manual

RoboPi v1.00 User Manual v0.85 Copyright 2014 William Henning

Step 5: Installing RoboPiLib

Download the latest version of RoboPiLib.zip from the RoboPi product page at:
http://www.mikronauts.com/raspberry-pi/robopi/

Step 6: Installing the RoboPi Firmware

Download the latest version of RoboPiObj.zip from the RoboPi product page at:
http://www.mikronauts.com/raspberry-pi/robopi/
You will also need to download the latest version of propeller_load.zip from the product page.

Step 7: Installing SimpleIDE for the Raspberry Pi (OPTIONAL)

You only need to install SimpleIde if you want to write your own custom Propeller software for RoboPi
on your Raspberry Pi, and do not wish to use the RoboPi firmware and RoboPiLib.
Only advanced users should attempt to program RoboPi from the "bare metal"
Here is how you can install the Propeller SimpleIDE development environment:
http://Mikronauts.com 10 2014-01-27