Level 1 and 2 Service Manual
Removing and Replacing the Camera
6809490A38-O
1.
Remove the battery cover, battery, SIM card, antenna, rear housing, and
transceiver board assembly, flip assembly, the front flip, metal flip shield and
rubber gasket as described in the procedures.
2.
Using a small screw driver, gently pry the camera flex connector lock tab and
unplug the camera flex from the connector.
3.
Remove the camera and camera grommet.
Camera
& Grommet
Camera Flex
Figure 15. Removing the Camera
4.
To replace, align camera with the grommet and press it in place.
5.
Plug the camera flex into the flex connector and press down the flex connector
lock tab securing the flex connection.
6.
Replace the rubber gasket, metal shield, flip front cover, flip assembly,
transceiver board assembly, rear housing, antenna, SIM card, battery, and
battery cover as described in the procedures.
September 28, 2004
Camera Flex Connector Lock Tab
Disassembly
27