Use The Dvd Player - Bang & Olufsen BeoVision 7 Manual

Hide thumbs Also See for BeoVision 7:
Table of Contents

Advertisement

1
You can start and stop playback, step 
between chapters and tracks and cue 
back and forth on a disc. Bring up 
the DVD menus to change, for 
example, audio or subtitle language. 
Use the DVD main menu to make 
your own settings for DVD playback. 
You can always resume playback of 
the loaded DVD at the point where 
you left off provided that you have 
just stopped playback of the DVD by 
pressing STOP twice, not three times. 
When playing an audio CD, the 
television screen is blank. 
If you have a Beo4 remote control, note that 
some discs do not register, whether the DVD 
player is in "play mode" or "menu mode" 
when being operated. In these few cases, you 
must press the yellow button before sending a 
command to the player; In menus, for example, 
you must press the yellow button and then 
GO, to store a selection. 

Use the DVD player

Load and play a disc
Place a disc in the loader with the label facing
upwards. Eight centimetre discs may only be
loaded provided with a suitable adaptor. Discs of
other shapes cannot be played.
*NOTE! If the DVD player cannot recognise the 
format of a loaded disc, the disc is ejected and 
DVD LOAD is shown in the display window. This 
may be due to disc faults such as dust, dirt, finger-
prints or scratches, or because the DVD is from an 
incompatible region. For more information about 
handling DVDs, refer to the chapter 'Maintenance
of your television' on page 22. 
To load a disc, press the load bar below the
television screen.
To load a disc and begin playback ...
> Press the load bar below the screen. The loader 
slides out, and the display prompts you to load 
a disc. 
> Place a disc in the loader as described to the left. 
Load bar
> Press and hold the load bar. The loader retracts, 
DVD is activated and playback begins 
automatically.*
  To load a DVD while watching TV, for example,
for playback at a later point in time, press the load
bar shortly. The loader retracts and playback
does not begin.
If you restart playback of a loaded disc after an
interruption, playback resumes at the point of
interruption.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents