Beo5 and Beo4
Beo5 and Beo4 operation of your television
resemble each other. However, there are a few
main differences to take into consideration.
For more information about remote control buttons,
refer to the Guide enclosed with your remote
control.
>> Introducing your BeoVision and remote control
Beo5
The centre button and PLAY ...
The centre button is used to accept and store
settings. PLAY is used to start playback of, for
example, a DVD.
STOP and BACK ...
STOP is used to pause and stop playback of, for
example, a DVD and to back up through menus.
BACK is used to exit menus.
Source control and scene display ...
In the source control and scene displays
different functions are available to control
sources and set the scene.
Arrow buttons ...
Beo5 has two sets of arrow buttons. With the
outer arrow buttons you cue, rewind and step
through programmes, tracks and recordings.
With the inner arrow buttons you move around
in menus.
Source control display ...
Functions related to built-in or connected
equipment, such as the built-in DVD player or a
set-top box, are displayed in the source control
display.
Beo4
GO ...
GO is used to accept and store settings. It is also
used to start playback of, for example, a DVD.
STOP and EXIT ...
STOP is used to pause and stop playback and to
go back to the previous on-screen menu. EXIT
on Beo4 is used to exit all menus.
LIST ...
In LIST different functions are available to
control sources and set the scene. In most cases
you must press GO on Beo4 to enter or accept
the function you have found.
Arrow buttons ...
Beo4 has one set of arrow buttons, which you
use to cue, rewind and step through
programmes, tracks and recordings and to
move around in menus.
Menu overlay ...
You can bring up a menu overlay on the tele-
vision screen, if you press MENU. This menu
overlay provides you with shortcuts to different
functions.