Bang & Olufsen BeoVision 7 Manual page 10

10
>> Watch TV
Turn the television
For further information about how to preset
positions for TV viewing, refer to the chapter 'Set
positions for the television to turn to' on page 44
in the Reference book.
You can turn the television using your remote
control.*
> Press to bring up the SCENE display on Beo5,
then press Stand to bring up the STAND display.
(Beo4: Press LIST repeatedly to display STAND).
> Press Turn or Turn to turn the television to
the left or the right, or press Position 1 – 9 to
choose a pre-defined position; Position
1 represents the far left position, Position
 represents the far right position. (Beo4: Press
or or a number button. 1 represents the far
left position,  represents the far right position).
> If your television is equipped with a stand or
wall bracket with motorised tilt function, press
Tilt to bring up the Tilt display then press Tilt
or Tilt to tilt the television up or down.
(Beo4: Press or ).
*Note: You cannot use the motorised stand or wall
bracket before you have completed the calibration
of the built-in stand. Please refer to the chapter
'First time setup' on page 26 in the Reference
book.