Bang & Olufsen BeoVision 7 Manual page 21

Enter the pincode
If your television has been disconnected from
the mains for 15–30 minutes, the television
prompts you for the pincode when you
switch it on. You may not be able to switch
the television on immediately – wait
approximately 30 seconds and try again.
IMPORTANT! If you are prompted for a
pincode the first time you switch on your
television, contact your Bang & Olufsen
retailer.
NOTE! Should you lose or forget your code,
contact your Bang & Olufsen retailer. Your retailer
can provide you with a mastercode, which
disables your pincode.
PINCODE
PINCODE 0 . . .
next
accept
GO
MASTERCODE
MASTERCODE 0 . . . .
next
accept
GO
When your television is switched on ...
> Press and enter the code digits using the
number buttons. (Beo4: Use the number
buttons).
> Press the centre button when the last digit is
entered. (Beo4: Press GO).
> Your television starts up again.
Five incorrect entries will cause the television to
shut down for three hours, during which
operation is not possible.
If you have forgotten your pincode ...
> Contact a Bang & Olufsen retailer to receive a
five-digit mastercode.
> When the television prompts you for your
pincode, press and hold to bring up the
MASTERCODE menu.
> Press , enter the code digits using the number
buttons and press the centre button to
deactivate your pincode and reactivate your
television. (Beo4: Use the number buttons and
press GO).
To use the pincode system again ...
> Follow the procedure for activating the pincode
system.
21