Craftsman 82339 Owner's Manual page 8

SPECIFICATIONS
NOTE: Accuracy specifications consist of two elements:
• (% reading) – This is the accuracy of the measurement circuit.
• (+ digits) – This is the accuracy of the analog to digital converter.
NOTE: Accuracy is stated at 64
75% RH ambient MultiMeter conditions.
Diode Test
Continuity Check
Input Impedance
Display
Overrange indication
Polarity
Measurement Rate
Low Battery Indication
Battery
Fuses
o o
F to 82 F (18
Test current of approximately 1mA, open
circuit voltage 2.8V DC typical
Audible signal will sound if the resistance is
less than approximately 70!, open circuit
voltage 2.8V DC typical
10M! (VDC and VAC)
2000 count LCD
"1" is displayed
Automatic (no indication for positive polarity);
Minus (-) sign for negative polarity.
0.4 seconds, nominal
" " is displayed if battery voltage drops
below operating voltage
Requires one 9V NEDA 1604 or 6F22 battery
(sold separately)
mA range, 200mA/250V fast blow
10A range, 10A/250V fast blow
8
o o
C to 28 C) and less than