Starting The Washer - Maytag FRONT-LOADING MULTI-LOAD COIN-OPERATED COMMERCIAL WASHER User Manual

5. Cycle Selections
The program can be chosen by pressing one of 3 buttons
on the left hand side of the display. Choose the correct cycle
depending on the type of fabric and desired wash temperature.
For washing cottons and linens, it is recommended to use
the Normal wash cycle.
POWER
WASH
POWER
SELECT CYCLE
WASH
POWER WASH
NORMAL
NORMAL
DELICATES
DELICATES
ENGLISH
Control Panel with Cycles Shown
NOTE: All rinses are in cold water.
An indicator on the display shows what stage the cycle is in at
all times.
See Programming Guide for instructions on modifying factory
settings as well as available programming and setup options.
6. Option Selections
Options can be chosen by pressing one of 3 buttons on the
right hand side of the display.
TEMPERATURE
POWER
PRICE: $2.75
WASH
POWER WASH
NORMAL
DELICATES
Control Panel with Options Shown
See Programming Guide for instructions on modifying factory
settings as well as available programming and setup options.
DELICATES
NORMAL
PRICE
TEMPERATURE
$2.75
SOIL LEVEL
$2.00
$2.00
EXTRA RINSE
ESPANOL
EXTRA RINSE
SOIL LEVEL
SELECT OPTION OR
TEMPERATURE
HOT
MINUTES
35
SOIL LEVEL
HEAVY
EXTRA RINSE
EXTRA RINSE
7. To Fill the Dispensers
The dispenser is located on the top of the washer.
Dispenser (on top of washer)
Prewash – It is recommended you add detergent for
the prewash prior to starting the cycle.
Main Wash – Add powdered detergent or powdered
bleach detergent prior to starting the cycle.
Main Wash – Add liquid detergent or liquid bleach
detergent prior to starting the cycle.
Fabric Softener – Add fabric softener prior to starting
the cycle or before the final rinse.
NOTES:
• Use only High Efficiency (HE) detergents.
• Refer to the detergent manufacturer's instructions for
proper dosing. Too much detergent can cause poor
wash results and excess sudsing.
• Make sure that the lid of the soap dispenser is closed
before starting the washer.

8. Starting the Washer

Select the desired cycle by pressing the button for that cycle.
Select the desired options by pressing the buttons for those
options.
Insert payment needed for operation. The display shows the
amount remaining to be paid. If the display shows PRESS
START, the washer can be started.
Add detergents and other wash additives prior to selecting
a cycle (see Step 7 above).
The washer will not start until the door latches and the
"START" button is pressed. If the door is not closed, close
and latch the door, then press the "START" button again.
During the wash cycle, the cycle progress and estimated
time remaining will appear in the display.
3