Telephony Via The Bluetooth ® Interface - Mercedes-Benz COMAND control panel Operating Instructions Manual

press W.
pressing the 6 or ~ button and
R
using the telephone keypad on COMAND
pressing the 6 or ~ button on the
R
multifunction steering wheel
using the Voice Control (see the separate
R
Voice Control operating instructions)
Unless stated otherwise, the descriptions and
illustrations in this section refer to COMAND.
Function restrictions
The telephone is not ready for use in the
following situations:
the telephone automatically tries to log on
R
to a network. If no network is available, you
may not be able to make a "911"
emergency call. If you attempt to make an
outgoing call, the No Service
appear for a short while.
911 emergency call
G WARNING
The 911 emergency call system is a public
service. Using it without due cause is a
criminal offense.
The following requirements must be fulfilled
for a 911 emergency call:
the mobile phone must be switched on.
R
a network must be available.
R
a valid and operational SIM card must be
R
inserted in the mobile phone.
the mobile phone is connected to COMAND
R
®
via Bluetooth .
If you cannot make an emergency call, you
must arrange rescue measures yourself.
Enter numbers on COMAND (
X
Press the 6 button.
X
The telephone makes the connection.
Wait for the emergency call center to
X
respond and then describe the emergency.
Telephony via the Bluetooth
Telephony via the Bluetooth
interface
Conditions
On the mobile phone
For telephony via COMAND's Bluetooth
interface, a Bluetooth
phone is required.
i
Not all mobile phones available on the
market are equally suitable. More detailed
information on suitable mobile phones and
on connecting Bluetooth
phones with COMAND can be found on the
Internet at
http://www.mbusa-mobile.com.
Alternatively, call the Mercedes-Benz
Customer Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372)
message will (for USA) or Customer Relations at
1-800-387-0100 (for Canada).
The battery of the mobile phone should
always be kept sufficiently charged in order
to prevent malfunctions.
In preparation for telephoning via the
Bluetooth
following items on your mobile phone (see the
mobile phone operating instructions):
Hands-Free Profile
R
The mobile phone must support Hands-
Free Profile 1.0 or above.
Bluetooth
R
On certain mobile phones, the device itself
must be made "visible" to other devices, as
well as activating the Bluetooth
(see the mobile phone operating
instructions).
R Bluetooth
Every Bluetooth
page 121).
Bluetooth
Y
is freely definable, but can be identical for
all devices from the same manufacturer. It
is therefore recommended that you change
this name so that you can easily recognize
®
®
-capable mobile
®
-capable mobile
®
interface, you should check the
®
visibility
®
device name
®
device has its own
®
device name. This device name
interface
115
®
®
®
function
Z