Mercedes-Benz COMAND control panel Operating Instructions Manual page 149

Station memory (example)
Select a preset by turning cVd the
X
COMAND controller and press and hold
W until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations
with adequate reception under the presets.
The search starts at the lowest frequency.
COMAND stores any stations found,
beginning with preset 1. The storing process
ends once the highest frequency has been
reached or once ten stations have been
found. Any stations stored manually under
the presets will be lost. COMAND may not
occupy all memory slots when storing.
Option 1: press W the COMAND controller
X
when the display/selection window is
active.
The station preset memory appears.
Option 2: select Presets
X
and turning cVd the COMAND controller
and press W to confirm.
The station preset memory appears.
Irrespective of the option, select
X
Autostore and press W to confirm.
In both cases, COMAND searches for
stations that can be received. You will see
a message to this effect. The available
stations are automatically stored in the
preset positions.
To cancel storing: select
X
press W to confirm.
Weather Band
Switching on
X
or
X
X
Searching for a channel
X
or
X
Selecting a channel from the channel
list
X
by sliding VÆ
Cancel and
Press the $ function button repeatedly
until the Weather Band is switched on.
Select the currently set waveband
AM by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
Select WB from the menu and press W to
confirm.
Quick select: turn cVd or slide XVY the
COMAND controller while the display/
selection window is active.
Press the E or F button.
Channel search scans up or down and
stops at the next channel found.
Select Channel by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
The channel list appears.
Radio mode
147
FM or