Memory Function In The Rear Compartment; Calling Up A Stored Setting - Mercedes-Benz S-Class Operator's Manual

Memory function in the rear compartment

134
backrest in the lumbar and shoulder
regions
active multicontour seat: side bolsters of
R
the backrest, shoulder of the backrest,
contour of the backrest, dynamic function
level
seat heating: distribution of the heated
R
sections of the seat cushion and backrest
driver's side: position of the exterior
R
mirrors on the driver's and front-passenger
sides
Adjust the seat accordingly (
X
On the driver's side, adjust the steering
X
wheel ( page 127) and the exterior mirrors
Y
( page 131).
Y
Press memory button M and one of the
X
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.

Calling up a stored setting

Press and hold the relevant storage
X
position button 1, 2 or 3, until the seat,
steering wheel and exterior mirrors are in
the stored position.
i
If you release the storage position button,
the seat, steering wheel and mirror setting
functions stop immediately. The
multicontour seat setting or the 4-way
lumbar support is still carried out.
Memory function in the rear
compartment
Important safety notes
G
When the memory function adjusts the seat
or steering wheel, you and other vehicle
occupants – particularly children – could
become trapped. There is a risk of injury.
While the memory function is making
adjustments, make sure that no one has any
body parts in the sweep of the seat or steering
wheel. If somebody becomes trapped,
immediately release the memory function
position button. The adjustment process is
stopped.
G
Children could become trapped if they
activate the memory function, particularly
when unattended. There is a risk of injury.
When leaving the vehicle, always take the
page 112).
Y
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
General notes
The settings for the rear seat and the front-
passenger seat can be stored using the rear-
compartment memory function.
If the indicator lamp in the v button is
R
not lit, store the rear seat settings.
If the indicator lamp in the v button
R
lights up, store the front-passenger seat
and rear seat settings. Both the front-
passenger and rear seat are taken into
account with this setting. Depending on the
equipment in the vehicle, two or three
memory positions can be stored for the
front-passenger and rear seats.
WARNING
WARNING