Memory Function; Using The Memory Button; Calling Up A Stored Parking Position Setting; Storing Settings - Mercedes-Benz S-Class Operator's Manual

Using the memory button

You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M:.
Turn the SmartKey to position 2 in the
X
ignition lock ( page 171).
Y
Press button = for the exterior mirror on
X
the front-passenger side.
Use adjustment button ; to adjust the
X
exterior mirror to a position that allows you
to see the rear wheel and the curb.
Press memory button M : and one of the
X
arrows on adjustment button ; within
three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat
X
the steps.
Calling up a stored parking position
setting
Turn the SmartKey to position 2 in the
X
ignition lock ( page 171).
Y
Adjust the exterior mirror on the front-
X
passenger side using button =.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have
R
disengaged reverse gear
if you press button ? for the exterior
R
mirror on the driver's side

Memory function

Memory function
Important safety notes
G WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat
or steering wheel, you and other vehicle
occupants – particularly children – could
become trapped. There is a risk of injury.
While the memory function is making
adjustments, make sure that no one has any
body parts in the sweep of the seat or steering
wheel. If somebody becomes trapped,
immediately release the memory function
position button. The adjustment process is
stopped.
G
WARNING
Children could become trapped if they
activate the memory function, particularly
when unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.

Storing settings

With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
seat, backrest, head restraint position and
R
contour of the backrest in the lumbar
region
multicontour seat: the side bolsters of the
R
backrest as well as the contour of the
133
Z