Resetting The Side Windows; Using Keyless-Go - Mercedes-Benz S-Class Operator's Manual

On vehicles with a panorama roof with power
tilt/sliding panel, you can then close the
roller sunblinds.
i
Notes on the automatic reversing feature
for:
the side window (
R
the panorama roof with power tilt/
R
sliding panel ( page 103)
Y
Using the SmartKey
Press and hold the & button until the
X
side windows and the panorama roof with
power tilt/sliding panel are fully closed.
Make sure that all the side windows and the
X
panorama roof with power tilt/sliding
panel are closed.
On vehicles with a panorama roof with power
tilt/sliding panel:
Press and hold the & button again until
X
the roller sunblinds of the panorama roof
with power tilt/sliding panel close.
To interrupt convenience closing:
X
release the & button.

Using KEYLESS-GO

The SmartKey must be outside the vehicle. All
the doors must be closed.
Touch recessed sensor surface : on the
X
door handle until the side windows and the
page 99)
Y
panorama roof with power tilt/sliding
panel are fully closed.
i
Make sure you only touch recessed
sensor surface :.
Make sure that all the side windows and the
X
panorama roof with power tilt/sliding
panel are closed.
Touch recessed sensor surface : on the
X
door handle again until the roller sunblinds
of the panorama roof with power tilt/
sliding panel close.
To interrupt convenience closing:
X
release recessed sensor surface : on the
door handle.

Resetting the side windows

If a side window can no longer be closed fully,
you must reset it.
Close all the doors.
X
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Pull the corresponding switch on the door
X
control panel until the side window is
completely closed (
Hold the switch for an additional second.
X
If the side window opens again slightly:
Immediately pull the corresponding switch
X
on the door control panel until the side
window is completely closed (
Hold the switch for an additional second.
X
If the respective side window remains
X
closed after the button is released, then it
has been set correctly. If this is not the
case, repeat the steps above again.
Side windows
page 99).
Y
page 99).
Y
Z
101