Trunk; Locking The Vehicle (Mechanical Key); Obstacle Recognition With The Trunk Lid Reversing Feature - Mercedes-Benz S-Class Operator's Manual

Locking the vehicle (mechanical key)

If the vehicle can no longer be locked with the
SmartKey or KEYLESS-GO, use the
mechanical key.
Open the driver's door.
X
Close the front-passenger door, the rear
X
doors and the trunk lid.
Press the locking button (
X
Check whether the locking knobs on the
X
front-passenger door and the rear doors
are still visible. Press down the locking
knobs by hand, if necessary.
Close the driver's door.
X
Take the mechanical key out of the
X
SmartKey ( page 86).
Y
Insert the mechanical key into the lock of
X
the driver's door as far as it will go.
Turn the mechanical key clockwise as far
X
as it will go to position 1.
The locking knob drops down and the
driver's door is locked.
Turn the mechanical key back and remove
X
it.
Make sure that the doors and the trunk lid
X
are locked.
Insert the mechanical key into the
X
SmartKey.
i
If you lock the vehicle as described above,
the fuel filler flap is not locked. The anti-
theft alarm system is not armed.

Trunk

Important safety notes
G
If objects, luggage or loads are not secured or
not secured sufficiently, they could slip, tip
over or be flung around and thereby hit vehicle
occupants. There is a risk of injury,
page 91).
Y
particularly in the event of sudden braking or
a sudden change in direction.
Always store objects so that they cannot be
flung around. Secure objects, luggage or
loads against slipping or tipping before the
journey.
G
If persons, particularly children are subjected
to prolonged exposure to extreme heat or
cold, there is a risk of injury, possibly even
fatal. Never leave children unattended in the
vehicle.
! The trunk lid swings upwards when
i
Do not leave the SmartKey in the trunk. You
could otherwise lock yourself out.
You should preferably place luggage or loads
in the cargo compartment. Observe the
loading guidelines (
Obstacle recognition with the trunk
lid reversing feature
On vehicles with trunk lid remote closing
feature, the trunk lid is equipped with
automatic obstacle recognition with
reversing function. If a solid object blocks or
restricts the trunk lid when automatically
opening or closing, this procedure is stopped.
If the trunk lid is stopped during the closing
procedure, it will open again automatically.
WARNING
WARNING
opened. Therefore, make sure that there is
sufficient clearance above the trunk lid.
The opening dimensions of the trunk lid
can be found in the "Vehicle data" section
( page 429).
Y
page 316).
Y
Trunk
93
Z