Mercedes-Benz S-Class Operator's Manual page 369

plenty of water. Do not induce vomiting,
and seek medical attention immediately.
Immediately change out of clothing which
R
has come into contact with tire sealant.
If an allergic reaction occurs, seek medical
R
attention immediately.
! Do not operate the tire inflation
compressor for longer than eight minutes
at a time without a break. It may otherwise
overheat.
The tire inflation compressor can be
operated again once it has cooled down.
Using the TIREFIT kit
Do not remove any foreign objects which
X
have penetrated the tire, e.g. screws or
nails.
Remove the tire sealant bottle, the
X
accompanying TIREFIT sticker and the tire
inflation compressor from the stowage well
underneath the trunk floor (
Affix part : of the TIREFIT sticker within
X
the driver's field of vision.
Affix part ; of the TIREFIT sticker near the
X
valve on the wheel with the defective tire.
Pull plug ? with the cable and hose A out
X
of the housing.
Screw hose A onto flange B of tire
X
sealant bottle :.
Place tire sealant bottle : head
X
downwards into recess ; of the tire
inflation compressor.
Remove the cap from valve C on the faulty
X
tire.
Screw filler hose D onto valve C.
X
page 364).
Y
Insert connector ? into a 12 V socket
X
(
Y
Turn the SmartKey to position 1 in the
X
ignition lock (
Press on/off switch = on the tire inflation
X
compressor to I.
The tire inflation compressor is switched
on. The tire is inflated.
i
The pressure can briefly rise to
approximately 500 kPa (5 bar/73 psi).
page 328) in your vehicle.
page 171).
Y
First, tire sealant is pumped into the tire.
Flat tire
367
Z