Chrysler Patriot Owner's Manual page 31

Mini-Latch Stowage
2. Grasp the mini-latch plate and pull the belt
over the seat.
3. Route the shoulder belt to the inside of the
right head restraint.
PAGE POSITION: 31
Routing The Rear Center Shoulder Belt
Routing The Rear Center Shoulder Belt
JOB: @ibm2/chry_pdm/CLS_chrysler-intl/GRP_owners/JOB_202720-en-pat-10MK74-126-ENG-AA/DIV_og
4. When the belt is long enough to fit, insert the
mini-latch plate into the mini-buckle until you
hear a "click."
5. Sit back in the seat. Slide the regular latch
plate up the webbing as far as necessary to
allow the belt to go around your lap.
6. When the belt is long enough to fit, insert the
latch plate into the buckle until you hear a
"click."
Connecting Mini-Latch To Buckle
29
pubnum: