Photocapture Center™ Print Settings; How To Scan To A Memory Card Or Usb Flash Memory Drive - Brother MFC-J825DW Basic User's Manual

PhotoCapture Center™
print settings
You can change the print settings temporarily
for the next print.
The machine returns to its default settings
after 3 minutes, or if the Mode Timer returns
the machine to Fax mode.
(uuAdvanced User's Guide: Mode Timer )
Note
You can save the print settings you use
most often by setting them as the default.
(uuAdvanced User's Guide: Setting your
changes as a new default)
Printing photos from a memory card or USB Flash memory drive
How to scan to a
memory card or USB
9
Flash memory drive
You can scan monochrome and color
documents onto a memory card or USB Flash
memory drive. Monochrome documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Color documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is Color 200 dpi and
the default file format is PDF. The machine
automatically creates file names based on
the current date. (uuQuick Setup Guide) For
example, the fifth image scanned on July 1,
2011 would be named 01071105.PDF. You
can change the color and quality.
Quality
Color 100 dpi
Color 200 dpi
Color 300 dpi
Color 600 dpi
B/W 100 dpi
B/W 200 dpi
B/W 300 dpi
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
DO NOT take out the memory card or
USB Flash memory drive while the status
LED is blinking to avoid damaging the
card, USB Flash memory drive or data
stored on them.
b
Load your document.
c
Press
d
Press d or c to display to Media.
Selectable File
Format
JPEG / PDF
JPEG / PDF
JPEG / PDF
JPEG / PDF
TIFF / PDF
TIFF / PDF
TIFF / PDF
IMPORTANT
(SCAN).
9
9
57