Subscribe to Our Youtube Channel
Related Manuals for Accton Technology Cheetah iSharer-3010
Summary of Contents for Accton Technology Cheetah iSharer-3010
- Page 1 Cheetah iSharer-3010 Installation Guide IS3010 E012000-R02 85-0B3010-GO...
- Page 2 Support: 949-707-4847 or 888-398-4101 Internet: support@accton.com.tw RMA: 949-707-4828 or 888-398-3101 FAX: 949-707-2460 Accton is a registered trademark of Accton Technology Corporation. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. IS3010 E0100-R02 85-0B3010-GO...
-
Page 3: Table Of Contents
System Requirements NTRODUCTION ISP Requirements Chapter 3 Quick Installation Network Configuration Hardware Installation Network Settings at Client Site Settings for the Cheetah iSharer-3010 Test Setting Up Other Client Stations Chapter 4 Advanced Configuration Configuring by Web Management Intranet Setting IP Setting... -
Page 4: Package Contents
(LAN) to the Internet. For those who want to surf There are several applications for the Cheetah iSharer-3010, such as: the Internet at the lowest possible cost, this Cheetah iSharer-3010 provides a • convenient and powerful solution. It provides Internet access to multiple users by Shared IP Address sharing one or two dial-up accounts. - Page 5 Cheetah iSharer-3010 Installation Guide HAPTER EFORE TART...
-
Page 6: Hardware Description
Cheetah iSharer-3010 You must provide the following items prior to installing the Cheetah iSharer-3010: • A single-user Internet account from your ISP • At least one telephone line • At least one modem or ISDN TA (Terminal Adapter) • A computer with an Ethernet network card configured for TCP/IP. -
Page 7: Isp Requirements
Cheetah iSharer-3010 Installation Guide ISP Requirements Please collect the following information from your ISP before setting up the Cheetah iSharer-3010: • ISP authentication type or script (if not PAP/CHAP) • An ISP account which includes ISP dial-up user name and password •... -
Page 8: Network Configuration
Network Configuration Ethernet devices to the RJ-45 ports of the Cheetah iSharer-3010. This Installation Guide is designed to help install the Cheetah iSharer-3010 on your 5. Plug the CheetahiSharer-3010’s power supply into an AC power outlet, then plug network. The instructions included in this section assume you are setting up a new the power supply output cable into the power connector on the rear of the unit. - Page 9 Cheetah iSharer-3010 Installation Guide 4. Double click “Protocol.” 6. Double click the “TCP/IP” component. 5. On the left side of the window, choose “Microsoft,” and then select the “TCP/IP” component on the right side. After the TCP/IP component is installed, click “OK”.
-
Page 10: Settings For The Cheetah Isharer-3010
After finishing the TCP/IP setup, reboot the computer and run the browser to Note: Modem2 Settings are similar to Modem1. Fill in these fields if you need configure the Cheetah iSharer-3010. After that, set up other PCs on the LAN to use the second modem. -
Page 11: Chapter 4 Advanced Configuration
Cheetah iSharer-3010 Installation Guide HAPTER DVANCED ONFIGURATION... -
Page 12: Configuring By Web Management
Click “Intranet Setting” in the Advanced menu as shown below. IP Setting Fill in the “Gateway IP Address” and “Subnet Mask” for the Cheetah iSharer-3010. If you want to use the CheetahiSharer-3010’s DHCP service, enable “Dynamic IP Address,” and set the “Starting IP Address” and the “Number of Users.” Remember that if you have dial-in users, the last two IP addresses are automatically left for them to avoid overlapping with the dial-out users’... -
Page 13: Modem1 Setting
Cheetah iSharer-3010 Installation Guide The following is a sample script along with the proper syntax and description The virtual server can be used as a limited firewall to prevent direct access to local of the command. resources by a hacker. It can also simplify management because changes to IP addresses for local services will not affect access for Internet users. -
Page 14: Advanced
Dial In Setting Set “Dial on Demand” to “Enable” if you want the Cheetah iSharer-3010 to automatically connect to the Internet when it receives any requests for Internet Dial In User Account service. -
Page 15: Callback
Device Admin Setting Use this page to set the administration password. This page displays the firmware version and MAC address of your Cheetah iSharer-3010. It also allows you to change the password, or reset the device. When resetting the device, select “Yes”... -
Page 16: Configuring By Telnet
PC’s serial port using the enclosed serial cable. 1. At the DOS prompt, enter “telnet 192.168.1.1” to open the Telnet Configuration 2. Set the DIP switch on Modem2 of the Cheetah iSharer-3010 to “Config” mode. Program for the Cheetah iSharer-3010. You can also use the Telnet program provided by other operating systems to configure the Cheetah iSharer-3010. - Page 17 8. Click “OK” when finished. box shows the COM port you have connected the serial cable to. 9. Power on the Cheetah iSharer-3010 by plugging in the power adapter. The built- in configuration program will start automatically. Press “Enter” to open the main menu.
-
Page 18: Appendix A Troubleshooting
Cheetah iSharer-3010 Installation Guide PPENDIX ROUBLESHOOTING... - Page 19 This chapter provides the solutions to problems that may occur during installation You can also use the “Ping” command in MS-DOS to verify the and operation of the Cheetah iSharer-3010. Please refer to the following table to try network connection: •...
-
Page 20: Appendix B Specifications
Cheetah iSharer-3010 Installation Guide PPENDIX PECIFICATIONS... -
Page 21: Product Specifications
Cheetah iSharer-3010 Installation Guide Use Category 3, 4 or 5 unshielded or shielded twisted-pair cable for all 10Mbps Product Specifications RJ-45 connection, and Category 5 unshielded or shielded twisted-pair for all Standards Compliance IEEE 802.3 10BASE-T 100Mbps RJ-45 connections. IEEE 802.3u 100BASE-TX... -
Page 22: Warranty
Cheetah iSharer-3010 Installation Guide 15.Stellen Sie sicher, daß die Stromversorgung dieses Gerätes nach der EN 60950 Safety Compliance geprüft ist. Ausgangswerte der Stromversorgung sollten die Werte von AC 7,5-8V, 50- Underwriters Laboratories Inc. (USA) 60Hz nicht über oder unterschreiten sowie den minimalen Strom von 1A nicht unterschreiten.
Need help?
Do you have a question about the Cheetah iSharer-3010 and is the answer not in the manual?
Questions and answers