Change Connection Settings - CipherLab 8000 Series User Manual

AG Utilities & Mobile Link

3.2.4 CHANGE CONNECTION SETTINGS

You must have configured your Ethernet Cradle to connect to the host computer with
correct host IP and port number. On the System menu, click Link Properties to change
the following settings:
Link Port: The port number is "2000" by default. You may change it in Mobile Link,
as well as on your Ethernet Cradle.
Maximum Links: It allows up to 25 mobile computers to upload data by default. You
may change the number to meet your needs.
Refresh Link Information: Type or select an appropriate period of time for Mobile
Link to refresh the link status, in units of second.
Attempt to resume connection when disconnection is detected: Type or select how
many times Mobile Link will try to resume connection.
Auto Start Link Service: By default, it is set to automatically start the link service
upon execution of Mobile Link. You may disable it if necessary.
42
User Guide