Configure Wep - D-Link DHP-W307AV User Manual

Section 3 - Configuration
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the access point (192.168.0.50). Click
on Setup and then click Wireless.Settings on the left side.
2. Next to Security Mode in the Wireless Security Mode section, select
WEP Mode.
3. Next to WEP Encryption, select 64-bit or 128-bit encryption.
4. Next to WEP Key 1, enter a WEP key that you create. Make sure you
enter this key exactly on all your wireless devices.
5. Next to Authentication, select Both or Shared.Key.
D-Link DHP-W307AV User Manual

Configure WEP

52