Table of Contents
Advertisement
Time schedule
You can set to save the video data at a certain interval as scheduled regardless of the
actual occurrence of the event.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Event setup>.
3. Select <Time schedule> from <Event
action setup>.
4. Set whether or not to <Enable>.
5. Specify the <Transfer interval>.
6. Specify the <Activation time>.
• Always : Runs the specified operation
always.
If set to <Always>, the activation time
cannot be changed.
• Only scheduled time : Operation is
executed periodically on the set days/time.
• [Clear (
)] : Reset all settings.
• Minute : Click an area in Activation
Time and set the time by minutes.
• Hour : Drag your mouse at Activation
Time and set the time by hours.
J
The transfer interval setting value must be
smaller than the preset activation interval
to succeed in image transmission.
7. Set the operational conditions.
• FTP : Set whether to perform FTP transmission at the designated time.
8. When done, click [Apply (
)].
English _87
Hide quick links:
Advertisement
Table of Contents
