Table of Contents
Advertisement
Port
1. From the Setup menu, select the
<Network (
)> tab.
2. Click <Port>.
3. Type in each item in the Port menu as
necessary.
When setting your ports, you cannot use port
numbers such as 0~1023, 3702 or 49152.
• HTTP port : HTTP port used to
access the camera via the web
browser.
The default is 80(TCP).
Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security
policy.
• HTTPS port : It is the more secure version of HTTP, web communication protocol.
In SSL, set the HTTPS mode for use. The initial value is 443(TCP).
The permitted setting range is 1024 to 65535. (For the security reasons, in google chrome
browser, you cannot set the HTTPS port to 65535 for access.)
• Device port : Set a port used to transfer video signals with the Samsung
protocols.
• RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
• Web streaming port : Used to transfer videos to the Web Viewer; the default is 4520.
• Silverlight policy port : Silverlight is used to permit to acquire a network
connection; the default is 943.
M
If changed the HTTP port, the browser exits.
Afterwards, address should contain the newly assigned HTTP port trailing the IP.
ex) IP address: 192.168.1.100, HTTP port : Assigned 8080 http://192.168.1.100:8080
(If HTTP port is set to 80, no need to specify the port number)
The port range of the Web Streaming is between 4502 and 4534. If the Device port is with this
effective range, the Web Streaming port should be specified the same as the Device port.
You cannot change the Web Streaming/Silverlight policy server port of a camera.
4. When done, click [Apply (
)].
English _69
Hide quick links:
Advertisement
Table of Contents
