Samsung SNV-6013 User Manual page 14

overview
Inside
Item
Lens
Reset Button
Video Out Port
Micro SD Memory
Card Compartment
Power indicators
Camera fixing hole
14_ overview
Lens for the camera.
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Analog video output port. (for installation)
Compartment for the Micro SD memory card.
ON : While the power is on
POWER
OFF : If the power is off
Hole used for securing the camera onto a ceiling.
Description