Samsung SNV-6013 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SNV-6013
  6. User manual

Samsung SNV-6013 User Manual

Network camera
Hide thumbs Also See for SNV-6013:
Table of Contents

Advertisement

Quick Links

NETWORK CAMERA

User Manual
SNV-6013

Advertisement

Table of Contents
loading

Related Manuals for Samsung SNV-6013

Summary of Contents for Samsung SNV-6013

  • Page 1: Network Camera

    NETWORK CAMERA User Manual SNV-6013...

  • Page 2: User Manual

    Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

  • Page 3: Important Safety Instructions

    overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

  • Page 4: Explanation Of Graphical Symbols

    overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected.
  • Page 6 overview Please read the following recommended safety precautions carefully.  Do not place this apparatus on an uneven surface.  Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. ...

  • Page 7: Table Of Contents

    CONTENTS Important Safety Instructions OVERVIEW Product Features Recommended PC Specifications Recommended Micro SD/ SDHC/SDXC Memory Card Specifications NAS recommended specs What’s Included At a Glance Installation INSTALLATION & Inserting/Removing a Micro SD CONNECTION Memory Card Memory Card Information (Not Included) Connecting with other Device Connecting the Camera Directly NETWORK CONNECTION...

  • Page 8: Overview

    overview WEB VIEWER Connecting to the Camera Password setting Login Installing Silverlight Runtime Installing STW WebViewer Plugin Using the Live Screen Playing the recorded video Setup SETUP SCREEN Video Setup Network Setup Event Setup System Setup Specification APPENDIX Product Overview Troubleshooting Open Source Announcement 8_ overview...

  • Page 9: Product Features

    PRODUCT FEATURES • Dustproof/Waterproof (IP66) The dustproof and waterproof design makes you feel at ease when installing the product outdoors or exposing it to rain. • Full HD Video Quality • Multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs.

  • Page 10: Recommended Pc Specifications

    overview RECOMMENDED PC SPECIFICATIONS • CPU : Intel Core 2 Duo 2.4 GHz or higher (for using 1920x1080 30 fps) Intel Core i7 2.8 GHz or higher (for using 1920x1080 60 fps)  Web Plug-in is optimized to SSE 4.1 Instruction Set. •...

  • Page 11: Nas Recommended Specs

    NAS RECOMMENDED SPECS • Recommended capacity : 200GB or higher is recommended. • Simultaneous access : One unit of NAS can accept a maximum of sixteen camera accesses. • For this camera, you are recommended to use a NAS with the following manufacturer’s specs.
  • Page 12 overview Appearance Item Name Quantity Description Warranty card (Optional) Used to test the camera connection to a Cable for the testing monitor portable display device Template Product installation guide 5 . 5 m m 2 H o l e s 20 mm CABLE Hole For dome cover disassembly, assembly or Drill bit...

  • Page 13: At A Glance

    AT A GLANCE Appearance Item Description Dome cover Case cover used to protect the lens and the main unit. PoE Connector Connects to the network and supplies power through Ethernet cable. English _13...
  • Page 14 overview Inside Item Description Lens Lens for the camera. The button restores all camera settings to the factory default. Press and hold for about 5 seconds to reboot the system. If you reset the camera, the network settings will be adjusted so that Reset Button DHCP can be enabled.

  • Page 15: Installation & Connection

    installation & connection INSTALLATION  This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed. Precautions before installation Ensure you read out the following instructions before installing the camera: •...

  • Page 16: Installation

    installation & connection Installation 1. Using the template provided as an accessory, drill a hole(diameter 6mm, min depth of 45mm) for screw installation and firmly insert the plastic anchor provided as an accessory. 2. Fit the bottom hole to the anchor hole and insert and fix the taping screw (M4xL40).

  • Page 17: Adjusting The Monitoring Direction

    Adjusting the monitoring direction for the camera Tilt Lens rotation  Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation.

  • Page 18: Outdoor Installation

    installation & connection Outdoor installation When you install the camera outdoors, it should be waterproofed with waterproof butyl rubber tape (which can be purchased in stores) so that water does not leak from the gap of the cable connected in the outdoor area. 1.

  • Page 19: Inserting/Removing A Micro Sd Memory Card

    INSERTING/REMOVING A MICRO SD MEMORY CARD  Disconnect the power cable from the camera before inserting the Micro SD memory card.  Do not insert the Micro SD memory card while it’s upside down by force. Otherwise, it may damage the Micro SD memory card. Inserting a Micro SD Memory Card Push the Micro SD memory card in the direction of the arrow shown in the diagram.

  • Page 20: Memory Card Information (Not Included)

    installation & connection  Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released.  Before removing your Micro SD memory card, turn off the camera or go to <Storage>, turn the device off, and press the [Apply ( )] button.

  • Page 21: Connecting With Other Device

    CONNECTING WITH OTHER DEVICE Monitor PoE device Powering and networking Connect the PoE device and camera’s PoE connectors.  Connect to a PoE (Power over Ethernet) enabled router’s PoE connector.  Use PoE (Power over Ethernet) that is compliant with the IEEE802.3af protocols. English _21...

  • Page 22: Network Connection And Setup

    network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2.

  • Page 23: Connecting The Camera Directly To A Dhcp

    CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM INTERNET DSL/Cable Modem Camera External Remote PC DDNS Server (Data Center, KOREA) 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 24: Modem

    network connection and setup CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM INTERNET PPPoE Modem Camera External Remote PC DDNS Server (Data Center, KOREA) 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 25: Connecting The Camera To A Broadband Router With The Pppoe/Cable Modem

    CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband Cable Modem Cable Modem Camera Router External Remote PC DDNS Server (Data Center, KOREA) Local PC...

  • Page 26: Buttons Used In Ip Installer

    network connection and setup BUTTONS USED IN IP INSTALLER Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented.

  • Page 27: Static Ip Setup

     For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www.samsungcctv.com). STATIC IP SETUP Manual Network Setup Run <IP Installer_v2.XX.exe>...
  • Page 28 network connection and setup 2. Click [Manual Set]. The Manual Setting dialog appears. <IP Address>, <Subnet Mask>, <Gateway>, <HTTP Port>, and <VNP Port> of the camera are displayed in the preset values. 3. In the <Address> pane, provide the necessary information. •...
  • Page 29 If using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The <Subnet Mask> of the Broadband Router will be the <Subnet Mask>...

  • Page 30: Auto Network Setup

    network connection and setup Auto Network Setup Run <IP Installer_v2.XX.exe> to display the camera search list. At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.  For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.

  • Page 31: Dynamic Ip Setup

    DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN Checking the Dynamic IP 1.

  • Page 32: Port Range Forward (Port Mapping) Setup

    network connection and setup PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1.
  • Page 33 Port forwarding can be done without additional router setup if the router supports the UPnP (Universal Plug and Play) function. After connecting the network camera, set <Quick connect> of <Samsung DDNS> to <On> in the “Setup  Network  DDNS” menu.

  • Page 34: Connecting To The Camera From A Shared Local Pc

    network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera.

  • Page 35: Web Viewer

    web viewer CONNECTING TO THE CAMERA Normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...
  • Page 36 To register your device to the <DDNS> server, visit www.samsungipolis.com and register your device first, and then set the Web Viewer’s <Network> - <DDNS> to <Samsung DDNS>, as well as providing <Product ID> that had been used for DDNS registration.

  • Page 37: Password Setting

    PASSWORD SETTING When you access the product for the first time, you must register the login password. When the “Password change” window appears, enter the new password.  A new password should be eight to fifteen letters long and a combination of at least two of uppercase/lowercase alphabets, numbers and special characters.

  • Page 38: Installing Silverlight Runtime

    web viewer INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. To install on Windows OS 1.
  • Page 39 To install on MAC OS 1. Run the file trailing with “.dmg”. 2. Run the install package file automatically created, ending with “.pkg”. 3. Click <Continue>. 4. Select your language on the language selection screen, and click <Continue>. English _39...
  • Page 40 web viewer 5. Click <Agree>. 6. Click <Install>. 7. Enter the password of the account currently logged in, and click <Install Software> and continue. 8. Once completed, click <Close>. 40_ web viewer...

  • Page 41: Installing Stw Webviewer Plugin

    INSTALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. 1. When the monitoring page is accessed for the very first time, the installation page is displayed.
  • Page 42 web viewer 5. Click [OK]. The old version of Web Viewer Plug-in is deleted. 6. Click [Install] to begin installation of the Web Viewer Plug-in. 7. Click [Finish]. STW Web Viewer Plug-in installation is completed.  In your internet explorer, if you need to move to the installation screen after installing the STW webviewer plugin, check whether webviewer_...

  • Page 43: Using The Live Screen

    USING THE LIVE SCREEN Item Description Monitoring Move to the monitoring screen. Move to the screen where you can search for the video recording saved in your Micro Playback SD memory card or NAS. Setup Move to the Setup screen. Displays the Live video on the screen.

  • Page 44: To Capture The Snapshot

    web viewer Item Description Full Screen Switch the current video to the maximum size of the monitor. Capture Saves the snapshot as an image file in the .bmp or .jpg format. Hide the context The left-corner context menu will disappear but only the menu icon. menu To capture the snapshot 1.

  • Page 45: Playing The Recorded Video

    PLAYING THE RECORDED VIDEO  Before you can play the video, you must configure the record settings. For details on record settings, refer to “Storage”. (page 80) Name of event search screen and its function Item Description Set the search date and time range for data saved in your Micro SD memory Search range setting card or NAS.

  • Page 46: To Play The Content After Searching By Event

    web viewer To play the content after searching by event 1. Click the [Playback ( )] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4.
  • Page 47 Name of time search screen and its function Item Description Time bar The section in the specific period is played by moving the time bar. Set the search date using the calendar.  Search date setting If there is data saved in your Micro SD memory card or NAS on the day, it is marked as a box on the calendar.

  • Page 48: To Play After Searching By Time

    web viewer Item Description Video information Time data of the replayed video is displayed on the screen. Set the desired date to make a backup copy of video data saved in your Micro SD memory card or NAS. Backup  Can be set as up to 5 minutes.
  • Page 49 - How to set the time bar If you press the button, the details of the time bar section can be viewed. If you press the button, you can view a wider range of times and the desired time can be selected more easily. 6.
  • Page 50 web viewer To Play an AVI File (1) Micro SD memory card 1. Separate the micro SD memory card from the camera.  Before separating the micro SD memory card, set the <Device> to <Off> in the “Setup  Event  Storage” menu. 2.
  • Page 51 (2) NAS (Network-Attached Storage) 1. In Windows browser, use \\<ip address>\ to access. ex)\\192.168.20.31\defaultfolder\ch01\ img\2013_07_02\AVI 2. Go to <Computer>  <Network drive connection>  Enter 1. 3. Connected to the NAS. The directory structure is same as the directory structure for a Micro SD memory card.

  • Page 52: Setup Screen

    setup screen SETUP You can configure the video, network, event and system settings of the camera in the network. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears.  Microsoft Silverlight 5.0 or higher is required to be installed on the PC for setup pages that provide preview video.
  • Page 53 • E-mail/FTP profile : Video profile to be transferred to the specified email or FTP site.  Only the MJPEG codec can be set as the E-mail/FTP profile. • Record profile : The profile is applied to your Micro SD memory card or NAS when you record video.

  • Page 54: To Add/Change The Video Profile

    setup screen To Add/Change the Video Profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions. 1. Select one from the <Video profile> options. 2. Provide the name and select a codec. 3.
  • Page 55 • Encoding priority : You can set the video transfer method to Framerate or Compression. • GOV length : It specifies the distance (in terms of number of frames) between two consecutive I-Frames in a video sequence when H.264 codec was selected. (One I-Frame + 0~Several P-Frames) •...
  • Page 56 setup screen To Use Crop Encoding 1. Select <Use>. 2. Click <Set area>. The Crop Encoding Area Setup window will pop up. 3. Select <Ratio>. • Ratio: It sets up the aspect ratio of the user specified area. - 16:9 : The aspect ratio shall be set to 16:9 as close as to the user specified area.
  • Page 57 Video setup 1. From the Setup menu, select the <Video ( )> tab. 2. Click <Video setup>. 3. Select a <Video source> mode. • Flip mode : Turn upside down the image that is captured by the camera. • Mirror mode : Flip horizontal the image that is captured by the camera.

  • Page 58: Camera Setup

    setup screen Camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the <Video ( )> tab. 2. Click <Camera setup>. 3. Configure the settings as necessary of : Image preset, Sensor, SSDR, White balance, Back light, Exposure, Day/ Night, Special, OSD...
  • Page 59 4. Set the <Mode>. • Definition focus : This is the factory setting for your camera. Select it for video recording, focusing on reproducibility. • Motion focus : Record a moving object clearly. If there are many moving objects, such as on a road or in a crowded place like a museum, select this option. ...
  • Page 60 If the sensor mode is set to 50 fps or 60 fps, the <Back light> mode cannot be set to <WDR>. To Set SSDR (Samsung Super Dynamic Range) In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness.
  • Page 61 To Set White Balance You can correct the image colors based on white under any lighting conditions. 1. Select <White balance>. 2. Select <Mode>. • ATW : Corrects the colors of the camera video automatically. • Manual : You can adjust the red and blue gains of the camera video manually.
  • Page 62 setup screen To Set BLC You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select <Back light>. 2. Set <Mode> to <BLC>. 3. Set <BLC level>. You can change the level to adjust the brightness of the monitoring area.
  • Page 63 To Set Exposure You can adjust the exposure level of the camera. 1. Select <Exposure>. 2. Select each item and set it properly. • Brightness : Adjust the screen brightness. • Minimum shutter : The limit of the longest exposure time. ...
  • Page 64 setup screen To Set Day/Night 1. Select <Day/Night>. 2. Select each item and set it properly. • Mode: Mode is used to adjust the color of Color or Black and White. - Color : The video is always output in color.
  • Page 65 To Setup Special 1. Select <Special>. 2. Select each item and set it properly. • Sharpness mode : Adjust the overall sharpness of the image. If selecting <On>, you can adjust the sharpness of the image. • Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.
  • Page 66 setup screen To Set OSD 1. Select <OSD>. 2. Select each item and set it properly. • Title overlay : It specifies if the camera name shall be displayed on the screen. • Camera title : It specifies the name of the camera to be displayed on the screen.
  • Page 67 Smart codec setup Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the <Video ( )> tab. 2. Click <Smart codec setup>. 3.

  • Page 68: Network Setup

    setup screen NETWORK SETUP Interface 1. From the Setup menu, select the <Network ( )> tab. 2. Click <Interface>. 3. Set the <Interface> and <IPv6 setup> as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
  • Page 69 The permitted setting range is 1024 to 65535. (For the security reasons, in google chrome browser, you cannot set the HTTPS port to 65535 for access.) • Device port : Set a port used to transfer video signals with the Samsung protocols.
  • Page 70 • Samsung DDNS : Select this if you use the DDNS server provided by Samsung Techwin. - Product ID : Enter the product ID that is registered with the Samsung DDNS service. - Quick connect : It sets port forwarding automatically when used with a UPnP (Universal Plug and Play) supporting router.
  • Page 71 Registering with DDNS To register your product with the Samsung DDNS 1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account. 2. From the top menu bar, select <DDNS SERVICE> - <MY DDNS>. 3. Click [PRODUCT REGISTRATION].
  • Page 72 To connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set <DDNS> to <Samsung DDNS>. 2. Provide the <Product ID> that you registered product ID with the DDNS site. 3. Click [Apply (...
  • Page 73 IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <IP filtering>. 3. Select <Filtering type>. • Deny : If selecting this, access from those IPs that are added to the filtering will be restricted.
  • Page 74 setup screen You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <SSL>. 3. Select a secure connection system.  To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP>”.
  • Page 75 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <802.1x>. 3. Set the <IEEE 802.1x setting(EAPOL using EAP-TLS)>. • Enable IEEE 802.1x : Specify the use of the 802.1x protocol.
  • Page 76 setup screen You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <QoS>. 3. Click the [Add ( )] button. The IP list will be created. 4.
  • Page 77 • Enable SNMP Trap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name to receive messages. - IP address : Enter the IP address to which messages will be sent. - Authentication failure : It specifies whether an event shall be generated when the community information is invalid.
  • Page 78 Disable for UPnP Discovery. • Friendly name : Display the camera name. Friendly name is displayed in the format of SAMSUNG-<Model Name>-<MAC Address>.  In the Windows operating system which basically supports UPnP, the cameras connected to the network are displayed.

  • Page 79: Event Setup

    EVENT SETUP FTP / E-mail When an event occurs, you can set the FTP/email server to send an image recorded by your camera. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <FTP / E-mail>. 3. Select <FTP configuration> or <E-mail configuration>...
  • Page 80 setup screen • E-mail configuration - Server address : Enter the IP address of the e-mail server to send an event image. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server.
  • Page 81 If you insert a SD card saved in another saving file type (AVI/STW), you will need to format it before use. - STW : It is Samsung Techwin’s unique file format. - AVI : It is the conventional avi format.
  • Page 82 setup screen 4. Specify the <Normal record setup>. • Always : Always save recorded video in the Micro SD memory card.  If set to Always, the activation time cannot be changed. • Only scheduled time : Records only on the specified time of the specified day of week. •...
  • Page 83 Confirm that the NAS IP address and the camera IP address are in the same format. ex) The NAS & camera subnet mask initial value is 255.255.255.0. If the IP address is 192.168.20.32 then the NAS IP address should be in the range of 192.168.20.1~192.168.20.255.
  • Page 84 setup screen NAS (Network Attached Storage) guide  When you use the NAS, you might be unable to save data due to temporary network disconnections.  If the setting allows a Micro SD memory card and the NAS to be simultaneously connected for use, the higher priority for recording goes to the NAS.
  • Page 85 3. Click the <Shared Folder> in the file sharing and privilege menu. 4. Click the [Create] button. 5. After entering the shared folder name(ID), click the [OK] button to create a shared folder. In this example, the shared folder name is [testDirectory].
  • Page 86 setup screen 8. After clicking the [Create] button, enter name(ID) and password. In this example, name(ID) is set to [testID] and password is also set to [testID].  According to the NAS recommendations, when you use Netgear’s NAS equipment, do not allocate the capacity for use. 9.

  • Page 87: Time Schedule

    Time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup>. 3. Select <Time schedule> from <Event action setup>.

  • Page 88: Tampering Detection

    setup screen Tampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the <Event ( )>...
  • Page 89 Motion detection / Video analytics Events of motion detection and video analysis can be set to trigger event signal output. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup >. 3. Select <Motion detection / Video analytics>...
  • Page 90 setup screen  Motion detection and Video analytics cannot be used simultaneously.  Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected.  Detected size of an object may have difference with the actual size according to its shape. ...
  • Page 91 To use Motion detection It detects a motion that meets all conditions specified by sensitivity, size and area. 1. Select a motion detection mode. 2. Select <Sensitivity> tab to set the sensitivity level. You can set the sensor’s sensitivity to detect a motion out of the background from the monitoring video.
  • Page 92 setup screen 4. Select <Area> tab. You can specify an area on the screen to include or exclude the area to/from detection. You can specify up to 4 areas. • Detection area : Sets the entire screen as excluded from detection, and adds specified area as motion detection area.
  • Page 93 To use Video analytics It detects event that meets all conditions specified by sensitivity, size and area and the event condition rules. 1. Select the video analysis mode. 2. Set <Sensitivity>, <Size> and <Area>. For further details on settings, refer to “To use Motion detection”.
  • Page 94 setup screen To set the video analysis rules  Passing 1. Set the type to <Passing>. 2. On the screen, click on preferred starting and ending point of the virtual line, then a popup window appears. 3. Select the desired rule: •...
  • Page 95  Appearing (Disappearing) 1. Set the analysis type to <Appearing (Disappearing)>. 2. Select the desired event rule: • Defined Area Based Rules : It detects event of appearing object that appears in the area and remaining for a certain time period while not passing through the area borders, and opposite case of disappearing of objects existed in the area.

  • Page 96: Face Detection

    setup screen Face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup>. 3. Select <Face detection> from < Event action setup>. 4.
  • Page 97 Network disconnection You can receive and save events of a physically disconnected network. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup>. 3. Select <Network disconnection> from <Event action setup>. 4. Set whether or not to <Enable>. 5.

  • Page 98: System Setup

    setup screen SYSTEM SETUP Product information 1. From the Setup menu, select the <System ( )> tab. 2. Click <Product information>. 3. Check the camera information, or provide details according to your network environment. • Model : Model name of the product. •...

  • Page 99: Date & Time

    Date & Time 1. From the Setup menu, select the <System ( )> tab. 2. Click <Date & Time>. 3. Specify the time and date that will be applied to the camera. • Current system time : Displays the current time settings of your system. •...
  • Page 100 setup screen User 1. From the Setup menu, select the <System ( )> tab. 2. Click <User>. 3. Provide the necessary user information. • Administrator password change : Change the password for the administrator.  The default password is vulnerable to security threats.
  • Page 101 If the existing password is not matched, when you change the admin password, you cannot change the password. After changing your password, if there is a camera connected to a CMS or NVR client, then you need to re-register it with the newly changed password. If the camera is still connected with the same password, then the account may be locked because a client uses the previous password.
  • Page 102 setup screen Upgrade / Reboot 1. From the Setup menu, select the <System ( )> tab. 2. Click <Upgrade / Reboot>. 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default.
  • Page 103  During restarting the system, accessing with web viewer will not be made.  You can download the latest version from the Samsung web site (www.samsungcctv.com). To back up the current settings 1. Click [Backup]. The Save As dialog should appear.
  • Page 104 setup screen You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • System : You can check the system logs where any system changes are recorded including the time information.
  • Page 105 Profile access You can check the profile information. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Profile access>. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec.
  • Page 106 setup screen Open SDK A user can install an application on their camera to execute additional functions. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Open SDK>. 3. Click the [Browse ( button to select the *.cap file from the user folder.

  • Page 107: Appendix

    Off / On (Displayed up to 45 characters) Day & Night Auto (SW) / Color / B/W / Schedule Backlight Operational Off / BLC / WDR Compensation Wide Dynamic Range 120dB Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) English _107...
  • Page 108 appendix Items Description Digital Noise SSNRIII (2D+3D Noise Filter) (Off / On) Reduction Digital Image Off / On Stabilization Defog Off / Auto / Manual Motion Detection Off / On (4ea 4 Points Polygonal zones) Privacy Masking Off / On (32 Zones with 4 Points of Polygonal ) Gain Control Off / Low / Middle / High White Balance...
  • Page 109 Items Description Ethernet RJ-45 (10/100BASE-T) Video Compression H.264(MPEG-4 Part 10/AVC), Motion JPEG Format 1920x1080 / 1280x1024 /1280x960 / 1280x720 / 1024x768 / Resolution 800x600 / 800x450 / 640x480 / 640x360 / 320x240 / 320x180 H.264 : Max 60fps at all resolutions Motion JPEG : 1920x1080 / 1280x1024 /1280x960 / 1280x720 / Max.
  • Page 110 appendix Items Description HTTPS(SSL) Login Authentication Digest Login Authentication Security IP Address Filtering User access Log 802.1x Authentication Streaming Method Unicast / Multicast Max. User Access 15 users at Unicast Mode Micro SD/SDHC/SDXC Memory Slot - Recorded data in the SD/SDHC/SDXC memory card can be downloaded ONVIF Profile S Application Network...
  • Page 111 Items Description Operating Temperature -20°C ~ +55°C (-4°F ~ +131°F) / Less than 90% RH / Humidity Storage Temperature -30°C ~ +60°C (-22°F ~ +140°F) / Less than 90% RH Environmental / Humidity Ingress Protection IP66 Grade Vandal Resistance IK10 Input Voltage / Current PoE (IEEE802.3af,Class3) Electrical Power Consumption...

  • Page 112: Product Overview

    appendix PRODUCT OVERVIEW Unit : mm (inch) Ø 112.8 (4.44") Ø 52 (2.05") 112_ appendix...

  • Page 113: Troubleshooting

    TROUBLESHOOTING PROBLEM SOLUTION Check to make sure that the camera’s Network settings are appropriate. Check to make sure that all network cables have been connected properly. I can’t access the camera from a If connected using DHCP, verify that the camera is able to acquire web browser.
  • Page 114 appendix PROBLEM SOLUTION Verify the settings in the following sequence: <Motion detection / Video analytics> of <Event setup> is set A. Check <Data & Time> settings. to <Enable>, but no notification B. The <Motion detection / Video analytics> should be set to <Enable>. e-mail reaches me even when an C.

  • Page 115: Open Source Announcement

    Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com. If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.

  • Page 116: Gnu General Public License

    GNU GENERAL PUBLIC LICENSE The “Program”, below, refers to any such program or work, and a “work based on the Program” means either Version 2, June 1991 the Program or any derivative work under copyright law : that is to say, a work containing the Program or a portion Copyright (C)1989, 1991 Free Software Foundation, Inc.
  • Page 117 3. You may copy and distribute the Program (or a work 7. If, as a consequence of a court judgment or allegation of based on it, under Section 2)in object code or executable patent infringement or for any other reason (not limited to form under the terms of Sections 1 and 2 above provided patent issues), conditions are imposed on you (whether that you also do one of the following :...
  • Page 118 NO WARRANTY You should also get your employer (if you work as a programmer)or your school, if any, to sign a “copyright 11. BECAUSE THE PROGRAM IS LICENSED FREE OF disclaimer” for the program,if necessary. Here is a sample ; CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, alter the names: TO THE EXTENT PERMITTED BY APPLICABLE LAW.
  • Page 119 Finally, every program is threatened constantly by software The “Corresponding Source” for a work in object code patents. States should not allow patents to restrict form means all the source code needed to generate, install, development and use of software on general-purpose and (for an executable work) run the object code and to omputers, but in those that do, we wish to avoid the special modify the work, including scripts to control those activities.
  • Page 120 5. Conveying Modified Source Versions. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer You may convey a work based on the Program, or the equivalent access to the Corresponding Source in modifications to produce it from the Program, in the form of the same way through the same place at no further source code under the terms of section 4, provided that you...
  • Page 121 7. Additional Terms. However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) “Additional permissions” are terms that supplement the provisionally, unless and until the copyright holder explicitly terms of this License by making exceptions from one or more and finally terminates your license, and (b) permanently, if of its conditions.
  • Page 122 In the following three paragraphs, a “patent license” is any 14. Revised Versions of this License. express agreement or commitment, however denominated, The Free Software Foundation may publish revised and/ or not to enforce a patent (such as an express permission new versions of the GNU General Public License from time to to practice a patent or covenant not to sue for patent time.
  • Page 123 OpenSSL Combined License The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
  • Page 124 SNMP v1, SNMP v2c provided with the distribution. and SNMP v3 using both IPv4 and IPv6. For more additional information, send email to help.cctv@samsung.com. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement:...
  • Page 125 3. Neither the name of the Regents of the University of 3. Neither the name of Thomas BERNARD nor the names California nor the names of its contributors may be used of its contributors may be used to endorse or promote to endorse or promote products derived from this software products derived from this software without specific prior without specific prior written permission.
  • Page 126 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 127 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY APPLE AND ITS HOLDERS AND CONTRIBUTORS “AS IS” AND ANY CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF IMPLIED WARRANTIES OF MERCHANTABILITY AND MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 128 Copyright (c) 2006 Free Software Foundation, Inc. Mozilla Public License Since we, at Samsung Techwin, used the Mozilla Firefox component without modifying the source code according to the MOZILLA Public license 1.1, we are not obliged to provide the source code of the corresponding component.
  • Page 129 1.11. ‘’Source Code’’ means the preferred form of the Covered (d) Notwithstanding Section 2.2(b) above, no patent license is Code for making modifications to it, including all modules it granted: 1) for any code that Contributor has deleted from contains, plus any associated interface definition files, scripts the Contributor Version;...
  • Page 130 3.5. Required Notices. You must duplicate the notice in Exhibit 6.2. Effect of New Versions. Once Covered Code has been A in each file of the Source Code. If it is not possible to put published under a particular version of the License, You may such notice in a particular Source Code file due to its structure, always continue to use it under the terms of that version.
  • Page 131 8.3. If You assert a patent infringement claim against Participant 13. MULTIPLE-LICENSED CODE. alleging that such Participant’s Contributor Version directly or Initial Developer may designate portions of the Covered Code indirectly infringes any patent where such claim is resolved as Multiple-Licensed. Multiple-Licensedmeans that the Initial (such as by license or settlement) prior to the initiation of patent Developer permits you to utilize portions of the Covered Code infringement litigation, then the reasonable value of the licenses...
  • Page 132 The Independent JPEG Group’s JPEG Software The software included in this product contains copyrighted software that is licensed under the JPEG license. • JPEG license - Code project – Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Permission is NOT granted for the use of any IJG author’s Independent JPEG Group’s free JPEG software.
  • Page 133 T-Kernel License - This Product uses the Source Code of T-Kernel under T-License granted by the T-Engine Forum(www.t-engine.org) T-License [License Agreement for Source Code of T-Kernel] established by T-Engine Forum on January 23, 2004 revised on June 17, 2004 revised on December 21, 2006 revised on March 24, 2009 Article 1.
  • Page 134 Article 4. License of Source Code 4. The Distributor of Modification shall determine the name of the Modified Source Code subject to the rules separately 1. As provided for in this Article, T-Engine Forum shall established by T-Engine Forum and publish an appropriate provide, and grant a license to use, the Source Code free notice as required by the rules on the Patch for Modification of charge to any person who has taken the necessary...
  • Page 135 T-Kernel. Provided, however, that the Ported Source Code Article 9. Indemnity may be treated in the same way as the Modified Source Code until the time of registration hereunder. 1. Neither T-Engine Forum nor the copyright holder of the Source Code shall be liable for any damages (including, 5.
  • Page 136 authorized to submit on behalf of the copyright owner. For the 5. Submission of Contributions. Unless You explicitly state purposes of this definition, "submitted" means any form of otherwise, any Contribution intentionally submitted for electronic, verbal, or written communication sent to the Licensor inclusion in the Work by You to the Licensor shall be under the or its representatives, including but not limited to communication terms and conditions of this License, without any additional...
  • Page 137 BZip2 License This program, "bzip2", the associated library "libbzip2", and all documentation, are copyright (C) 1996-2007 Julian R Seward. All rights reserved. Component Name License bzip2-1.0.5 BZip2 http://www.bzip.org/ Redistribution and use in source and binary forms, with THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS or without modification, are permitted provided that the IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, following conditions are met:...
  • Page 138 PHP 3.01 License The PHP License, version 3.01 Copyright (c) 1999 - 2010 The PHP Group. All rights reserved. Component Name License php-5.2.17 PHP 3.01 http://www.php.net/distributions Redistribution and use in source and binary forms, with or Redistributions of any form whatsoever must retain the without modification, is permitted provided that the following following acknowledgment: "This product includes PHP conditions are met:...
  • Page 139 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 140 SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660...

Table of Contents