Table of Contents
Advertisement
Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1. From the Setup menu, select the
<Video (
)> tab.
2. Click <Smart codec setup>.
3. Select ROI Area.
• Face detection : Active if a face is
recognized on the monitoring screen.
J
You can detect max 35 faces on the
screen at the same time.
The minimum size of detectable face
is 45x45 (horizontal x vertical) pixels
for the given max resolution. But there
may be some errors depending on the
characteristics of your face or lighting.
• Manual : Specify the ROI area to monitor manually.
4. Set the image quality.
The ROI area will be displayed in the specified quality.
5. If you want to set the area of your interest by <Manual>, first, select the area with
your mouse and drag it.
You can specify up to 5 distinct areas.
6. To cancel all the settings for the area, click the [Clear (
7. When done, click [Apply (
J
The Smart codec will not be active if it is set to <Off> in <Video profile>. (page 52)
Go to <Event> <Event setup> <Face detection> and change it to <Enable> to set the
desired area for facial detection.
)].
)] button.
English _67
Hide quick links:
Advertisement
Table of Contents
