Table of Contents
Advertisement
setup screen
M
The preset setup functions as an aid to users to configure setup. After setting each preset mode,
users can freely change and save camera setup modes.
While using the preset mode, if any mode of the preset fails to perform the function for items
changed by the user, they can manually switch to the "Initial setting for each image preset
mode" for each table mode or perform factory resetting to revert to the original setup before use.
If you change the image preset, only shutter/AGC/SSDR/SSNR will be initialized for each mode.
Each preset's "Camera Setup" is not saved.
To Set the Sensor
It specifies how many frames the camera CMOS sensor will capture per second.
1. Select <Sensor>.
2. Select <Mode>.
M
Refer to "Video profile" for the framerate
setup range of the <Video profile>
according to mode setup. (Page 52)
If the sensor mode is set to 50 fps or 60 fps, the <Back light> mode cannot be set to <WDR>.
To Set SSDR (Samsung Super Dynamic Range)
In a scene where the difference between bright and dark is severe, you can increase the
brightness of the dark area alone to regulate the overall brightness.
1. Select <SSDR>.
2. Set <Mode> to <On>.
3. Configure the <Level> and <D-Range>
settings as necessary.
• Level : Adjust the level of the
dynamic range.
• D-Range : Select the amplitude area of the dynamic range.
60_ setup screen
Hide quick links:
Advertisement
Table of Contents
