On-Screen Indications - Sony PMW-200 Operating Instructions Manual

On-Screen Indications

While recording (or standing by to record), pressing the DISPLAY button displays the statuses and
settings of this unit on the LCD monitor/viewfinder screen.
Remarks
[M]: The indication of the items named with this suffix can be independently turned on/off with "Display
On/Off" in the LCD/VF SET menu (page 91).
[A]: The indication of items named with this suffix can be turned on/off using the assignable buttons to
which the corresponding on/off functions have been assigned (page 47).
[D]: The settings of the items named with this suffix can be changed using the Direct menu on the screen
(page 20).
1.
Battery remaining/DC IN voltage
indication [M] (page 21)
2.
i.LINK status indication (page 107)
Only when an external device is connected to
the i.LINK connector, the status of the device is
displayed.
3.
Special recording/operation status
indication
zREC
Recording in progress
STBY Standby for recording
CONT Standby for recording
When using Clip Continuous
Recording, indicates that a
clip is being continued.
"CONT" flashing: When
using Clip Continuous
Recording, indicates that there
is no continuing clip.
zS&Q REC Slow & Quick Motion
recording in progress
.
E
xt
S&Q STBY Standby for Slow & Quick
Motion recording
zINT REC Interval Recording in progress
INT STBY
Standby for Interval
Recording
zFRM REC
Frame Recording in progress
FRM STBY Standby for Frame Recording
zCACHE z in green: Standby for
Cache Recording
z in red: Cache Recording in
progress
4.
Media status indication
Memory card in slot A is active.
Memory card in slot B is active.
5.
Time data indication [M] (page 43)
6.
Media remaining indication [M] (page 26)
7.
Zoom position indication [M] (page 41)
On-Screen Indications 19