Deleting Clips; Storing/Retrieving The Setting Data - Sony PMW-200 Operating Instructions Manual

Deleting Clips

While standing by to record, the Last Clip DEL
function for deleting the last recorded clip and the
All Clips DEL function for deleting all clips from
an SxS memory card are available.
For clip deletion on the thumbnail screen, see
"Deleting Clips" on page 70.
To delete using the assignable button
Assign the Last Clip DEL function to one of the
assignable buttons (page 47) in advance.
Press the assignable button to which you have
assigned "Last Clip DEL," and select "Execute"
to delete the last recorded clip from the SxS
memory card.
To delete using the Setup menu
Select "Last Clip DEL" in "Clip" (page 99) in the
OTHERS menu, select "Execute," then select
"Execute" again to delete the last recorded clip
from the SxS memory card.
Note
When Clip Continuous Recording is set to "On," "Last
Clip DEL" cannot be selected.
Deleting clips collectively
Select "All Clips DEL" in "Clip" (page 99) in the
OTHERS menu, select "Execute," then select
"Execute" again to delete all the clips from the
SxS memory card.
Notes
• If the SxS memory card contains clips of both of HD
Mode and SD Mode, only the clips of the currently
selected mode are deleted.
• Clips with the OK mark (page 46) cannot be deleted if
FAT is selected for the file system. If UDF is selected,
clips set to "Lock Clip" (page 67) cannot be deleted.
Storing/Retrieving the Setting
Data
You can store all the menu settings (including
picture profiles) as a setup file on an SxS memory
card or a USB flash drive (PMW-200 only).
By retrieving the stored setup file, the proper
setup condition can be immediately obtained.
Note
Values for "Clock Set" and "Hours Meter" in the
OTHERS menu are not stored.
Storing the Setup file
To use an SxS memory card
Only one setup file—designated with the file
name "SETUP.SUF"—can be stored on one SxS
memory card.
1
Insert a memory card on which you
wish to store the setup file to a card slot.
Check that the corresponding memory card
icon is displayed on the screen. If a memory
card in the other slot is selected, press the
SLOT SELECT button to switch.
2
Select "Store" in "Camera Data" (page
95) in the OTHERS menu, then select
"EXECUTE."
An in-progress message is displayed during
writing. When writing is completed, a completion
message is displayed.
Notes
• If a setup file already exists on the memory card you
specified in Step 1, a message to confirm whether to
overwrite the file is displayed.
• If there is not sufficient space on the memory card, an
error message is displayed.
To use a USB flash drive (PMW-200 only, in UDF
mode)
Connect the formatted USB flash drive to the
external device connector (page 29).
Select All Save(USB) >Execute in step 2.
Retrieving the Setup file
To use an SxS memory card
When you retrieve the stored setup file, the
camcorder settings are changed according to the
file.
1
Insert the memory card on which you
stored the setup file into a card slot.
Check that the corresponding memory card
icon is displayed on the screen. If a memory
card in the other slot is selected, press the
SLOT SELECT button to switch.
Useful Functions 59