Memory Stick" Media/Sdhc Cards; Usb Flash Drives (Pmw-200 Only) - Sony PMW-200 Operating Instructions Manual

Note
When formatting, all data in an XQD memory card—
including protected images—are erased and cannot be
restored.
Connection between the camcorder and a PC
To use an XQD memory card in which data have
been recorded with an XDCAM/XDCAM EX-
series product, insert it into the slot of the
camcorder and connect between the PC and this
camcorder using a USB cable.
To use media formatted with this camcorder in
the slots of other devices
Make a backup of the media, then format it using
the other device.
"Memory Stick" media/SDHC
Cards
Use of the optional MEAD-MS01 or MEAD-
SD01 Media Adaptor permits you to insert a
"Memory Stick" or an SDHC card to the SxS
memory card slot and use it for recording and
playback in the same way as with an SxS memory
card.
Usable "Memory Stick"
"Memory Stick PRO-HG Duo" HX series
Usable SDHC card
Class 10 SDHC card
For details on use of the MEAD-MS01/SD01 Media
Adaptor, refer to the operating instructions supplied
with the respective adaptor.
Notes
• High-speed playback (page 15) may not be properly
achieved with a "Memory Stick" or an SDHC card.
• Slow Motion recording by the Slow & Quick Motion
recording function (page 49) cannot be made with a
"Memory Stick" or an SDHC card.
• "Memory Stick" media and SDHC cards do not
support recording with UDF.
Formatting
When you use a "Memory Stick" or an SDHC
card with this camcorder, formatting is required.
A "Memory Stick" or an SDHC card to be used
with this camcorder must be formatted using the
format function of this camcorder.
It is also necessary to format a "Memory Stick" or
an SDHC card for use if a caution message is
displayed when you mount the "Memory Stick"
or SDHC card.
28 Using Other Media
For a "Memory Stick" or an SDHC card that was
formatted with another system unsupported by
this camcorder, the message "Unsupported File
System" is displayed on the LCD monitor/EVF
screen.
Format the "Memory Stick" or SDHC card as
instructed below.
To execute formatting
Using "Format Media" (page 100) in the
OTHERS menu, specify "Media(A)" (slot
A) or "Media(B)" (slot B), then select
"Execute."
An in-progress message and status bar (%) are
displayed, and the ACCESS lamp lights in red.
When formatting is completed, a completion
message is displayed for three seconds.
Note
When formatting, all data in a "Memory Stick" or an
SDHC card including protected images are erased and
cannot be restored.
Connection between the camcorder and a PC
To use a "Memory Stick" or an SDHC card in
which data have been recorded with an XDCAM/
XDCAM EX-series product, insert it into the slot
of the camcorder and connect between the PC and
this camcorder using a USB cable.
To use media formatted with this camcorder in
the slots of other devices
Make a backup of the media, then format it using
the other device.

USB Flash Drives (PMW-200 only)

UDF
In UDF mode, you can connect a USB flash drive
to the external device connector (page 17) to
record, save and load the following data.
• "Loading a Planning Metadata file" (page 60)
• "Storing/Retrieving the Setting Data" (page
59)
The following Sony USB flash drives are
recommended for use with this camcorder.
• USM-M Series
Notes
• Use USB flash drives with a capacity of 4 GB to 32
GB.