O per a tio n
7.4
Factory settings
Audio alarm signal
No power signal from RSE
Unexpected power signal from RSE
Power reduction at level 0
Power reduction at level 1
Power reduction at level 2
Power reduction at level 3
DHCP
7.5
PC software mode
NOTE
As soon as the device is connected to the PC via the accompanying
USB cable, the USB mode is automatically activated.
7.5.1
Firmware update
A Firmware update can be carried out using the Powador-piccoLOG Device
Manager software.
During a Firmware update all five LEDs flash consecutively. Upon completion of
the Firmware update the device will restart and re-connect with the software.
Page 22
active
70 % of P
Nenn
70 % of P
Nenn
100 % of P
Nenn
60 % of P
Nenn
30 % of P
Nenn
0 % of P
Nenn
active
Operating manual Powador-piccoLOG_EN