Table of Contents
Advertisement
O per a tio n
7.6
Restarting the device
The device can be restarted by pressing the "RESET" button.
1
Figure 9: Press the "RESET (1)" button.
" Press "RESET (1)" button using a paper clip
»
The device will restart.
7.7
Resetting the device
7.7.1
Reset on factory settings
NOTE
All collected data will be deleted during the reset. The data collected
and stored in the Portal will not be affected by this.
•
Back up all data with the Powador-piccoLOG Device Manager
software prior to the reset.
Operating manual Powador-piccoLOG_EN
Page 23
Advertisement
Table of Contents
